Do you have schematics for this?
Yep, those dongles are available on Amazon at low cost, but in custom Seek Thermal camera I'd like to connect directly to desoldered Seek pcb from from its mUSB.
Anyway nice to have schematics for any working Seek thermal mUSB to PC USB to be able test those available.
On
wiki USB OTG we have such connectors:
Are there any resistors needed between some pins?
Haven't got time to make teardown of such adapter and draw schematics myself
Inside Seek dongle this looks like below, so of course in custom Seek camera we want solder those 5 mUSB OTG connector pins directly to its pads:
Not too many combinations, but detailed schematics could be helpfull for any Seek DIY player to distinguish proper adapter from that which won't work with Seek device based on a few measurements using multimeter
it looks like: (musbf4 <-> musbf5) <-> usbA4 but what is it between musbf1 and usbA1 in this custom DIY adapter?
Correct me if made wrong reverse of this tinny adapter...