ok, the pinball in question is the Terminator 2 pinball,
the transformer specs are:
100/115/220/230 VAC 50/60 Hz primary
Secondary windings:
6.8 VAC separate Molex connector for the illumination
100 VAC
80 VAC
51.4 VAC
16 VAC
13.3V AC
9 VAC
9.8 VAC
(those all go into a fat ugly Molex connector)
18 VAC for the audio ...
Connectors:
Molex 19-09-1096 and the male version is Molex 19-09-2099.
Transformer Schematic 12835
Width 3.474
Height 4.4
Depth 5.264
Mount Narrow (4.5)
Connector Male
1,2 (5V digital) 9VAC 9.84
3,4 (Flashers) 16VAC 17.06
5,8 (DMD 62V) 80VAC 86.8
6,9 (DCS #1) 18VAC 19.72
9,12 (DCS #2) 18VAC 19.74
6,12 (DCS) 36VAC 39.38
7,10 (Fliptronic) 51.4VAC 55.3
11,13 (12V digital)9.8VAC 12.47
GI 6.8VAC 7.90
DMD 100VAC 109.1
Line (115V primary) 120VAC 121.2
I need to check the line rating for the transformer. I would expect it to be in the 1200 - 1400 W range ...