Test Equipment Anonymous (TEA) group therapy thread

[med6753]

Stop posting awesome 3D printed stuff...

I want to kill myself.

https://en.m.wikipedia.org/wiki/Sarco_device

Need a 3D printer first 

  Too early in the morning for that shit. I think I'll go back to bed. 

[med6753]

It has begun. It’ll be cushions next. 

Followed by a fancy (re: expensive) bedspread, curtains, possibly a dressing table too.

Kiss your Eder 5 goodbye.   

[bd139]

Got to say it was nice last night at Ikea on my own. Got myself a nice new frying pan, cable tray and some daim bars. Not half a car full of salad shakers, bathroom pots, plants which will be murdered by the end of the week and candles that smell like a fire in a jelly bean factory.

[med6753]

Never been in an Ikea. Closest one is about an hour away in Jersey. Not sure I want to go in one anyway. 

[bd139]

I assume they’re the same in the US. If you ever go, don’t follow the arrows unless you have hiking shoes and provisions 

[med6753]

I've driven past the one in New Jersey and it's HUGE so I assume that's what you mean and most likely the same as yours.

[beanflying]

Stick to making your own @med. 3-4 times the price but at least you don't need to follow the Ikea instructions to assemble it  Last time I was in an Ikea the then attached Red Head went on a Bender with her Gold Card then gave it to me to pay 

[mrjoda]

Stop posting awesome 3D printed stuff...

I want to kill myself.

OK, so... i've started with wire holder I am out of filament so i have enough time to convert any other ideas to 3D models.

[bd139]

Stick to making your own @med. 3-4 times the price but at least you don't need to follow the Ikea instructions to assemble it  Last time I was in an Ikea the then attached Red Head went on a Bender with her Gold Card then gave it to me to pay 

[beanflying]

No Filament shortage here but the Red has taken a bit of the thrashing with WEA/Bosch bits. Printing out the Tracksaw version of the Dogs for my new bench. Nice snap in fit into the Aluminium.  Still printing the adjustable height tops.

Wonder if Zucca has gone Bender and Fry on us yet 

[mrjoda]

Nice, I printed some brush/files holders on my desk. "Only" 25 hours of printing and some swearing after as usual 

I founded that 3D printers are quite useful, but also can be really really frustrating.

[bd139]

They certainly can be a pain in the ass. I’ve only had two bad days so far. First one was bed alignment hell. Second time the filament got bunged up all around the nozzle. In 4 months that’s it. I expect some hell one day 

[Specmaster]

Got to say it was nice last night at Ikea on my own. Got myself a nice new frying pan, cable tray and some daim bars. Not half a car full of salad shakers, bathroom pots, plants which will be murdered by the end of the week and candles that smell like a fire in a jelly bean factory.

When you came out your wallet was a lot heavier than it has been in the past with SWMBO buying all kinds of junk to take home, shoved into cupboards and then get forgotten about 

[McBryce]

I had one bad print with the Ender 3 so far. All the vibration had loosened some of the screws in the frame and right in the middle of a relatively large print, the X-axis belt got loose and messed things up.

McBryce.

[beanflying]

Nice, I printed some brush/files holders on my desk. "Only" 25 hours of printing and some swearing after as usual 

I founded that 3D printers are quite useful, but also can be really really frustrating.

Good Idea I need another holder for the desk. Still needs a few more tabs to hold the lower level and maybe cut out or engrave some designs in the sides then out with the Laser Cutter in about 10-15 minutes 

Love Parametric modelling 

[mrjoda]

well... i live in 26sqm apartment so a have to choose between bed or laser cutter or buy a big laser cutter and sleep inside 

[bd139]

Anything with "big laser" in it is the correct answer 

[beanflying]

well... i live in 26sqm apartment so a have to choose between bed or laser cutter or buy a big laser cutter and sleep inside 

Bunk Bed and put the Laser and printer up top? 

[tggzzz]

Anything with "big laser" in it is the correct answer 

"Big laser" plus "appropriate fume extraction"

[med6753]

Stick to making your own @med. 3-4 times the price but at least you don't need to follow the Ikea instructions to assemble it  Last time I was in an Ikea the then attached Red Head went on a Bender with her Gold Card then gave it to me to pay 

I was thinking the same. Anytime I need a shelf or bench I make it myself using real wood and not that press board garbage.

Besides, I am out of room. 

[Brumby]

well... i live in 26sqm apartment so a have to choose between bed or laser cutter or buy a big laser cutter and sleep inside 

Bunk Bed and put the Laser and printer up top? 

No - You got that backwards.  Laser cutter and printer on the bottom (space where it's needed!!).  You sleep on top.  Has the added benefit of a first person thermal alarm.   

[xrunner]

Stop posting awesome 3D printed stuff...

I want to kill myself.

Come on Zucca. Who wears the pants in your household? 

[BU508A]

Stop posting awesome 3D printed stuff...

I want to kill myself.

Come on Zucca. Who wears the pants in your household? 

(Attachment Link)

By 3rd of May, 2020: her. 

[Zucca]

Come on Zucca. Who wears the pants in your household? 

I am dying, porca puttana.
Help me brother, what should I tell her? It will save money making our own Lego for the kids in the future?

Oh, there was a white pony in this thread...

[xrunner]

I am dying, porca puttana.
Help me brother, what should I tell her? It will save money making our own Lego for the kids in the future?

Do not worry brother.

Put her on the forum as a 3rd party posting on your account - we'll talk to her and get this mess set right for you in no time. She just doesn't understand your needs like we do.