Tektronix EMC120 Software Package

[George_Race]

I am looking for a copy of the Tektronix EMC120 Windows Software package for the TEK 2712 Spectrum Analyzer.
Does anyone have a download link, or a copy that they could share?

This WAS a free software package from Tektronix, but they no longer have it available, I have inquired directly to them and that was their answer.

Thanks,
George

[miguelvp]

Only thing I could find is this link:
http://tektronix.industrialpartner.com/products-2/27120b.htm

Hopefully if they have it they don't charge much.

I'm trying to find it with the wayback machine but no luck just yet.

[miguelvp]

It was never a download, it seems it was 4 floppy disks

https://web.archive.org/web/19991115220448/http://www.tek.com/Measurement/Products/catalog/27120a/order.html

27120B EMI Measurement System with EMC120 Windows Software

This product is no longer carried in our catalog.

ORDERING INFORMATION

27120B EMI Measurement System

Includes: 27120A System Manual and individual component instruments manuals.
27120B System Options

Opt. 05 - Add 2707 External Tracking Generator. Useable for site attenuation, filter design and evaluation.
Frequency Range: 100 kHz to 1.8 GHz.
Output Level: -48 to 0 dBm.
Opt. 10 - Add television demodulation. Useful for signal identification. Includes broadcast (AM) and satellite (FM) demodulation.
Opt. 11 - Add antennas, tripod and cable when system used for radiated measurements.
Opt. 16 - Add LISN and Transient Limiter when system used for conducted measurements.
Opt. 17 - Add 2706 RF Preselector.
International Power Plug Options

Opt. A1 - Universal Euro 220 V, 50 Hz.
Opt. A2 - UK 240 V, 50 Hz.
Opt. A3 - Australian 240 V, 50 Hz.
Opt. A4 - North American 240 V, 60 Hz.
Opt. A5 - Switzerland 220 V, 50 Hz.
EMI Measurement Software

EMC120 Software
Includes: Instruction manual and four 3.5 in. floppy disks.
EMC120U Software Upgrade Package

Upgrades S26EM12 Software to EMC120 Software.

[George_Race]

Great, thanks for all the information.

I was hoping that someone had saved the files somewhere on a server and they could be located.
I know that they are for a very early version of windows, but I do have equipment that can run them as I do believe they were run from the DOS command as machine language routines.
I have a very old laptop, that still works, and has windows 3.1.  I have the install disks for most all the early versions of windows, and they are on 3.5 inch floppy's!
I also have an original copy of Windows 98 on DVD, which may have been what EMC120 ran under.  It is about in that time frame that the TEK 2712 was being phased out for newer versions.

I will give "Industrial Partner" a call tomorrow and see what they say about price.  Their page does say that it is available.  Probably on some dusty shelf in a closet that most don't even know about!

I will keep checking back here to see if anyone may come up with a copy, and will leave word on what I find out tomorrow.

Thanks again,
George

[AndersJ]

I run EMC120 under Windows 2000.
I have V1.7 and V1.8.

[Pinkus]

Great, thanks for all the information.

I was hoping that someone had saved the files somewhere on a server and they could be located.
I know that they are for a very early version of windows, but I do have equipment that can run them as I do believe they were run from the DOS command as machine language routines.
I have a very old laptop, that still works, and has windows 3.1.  I have the install disks for most all the early versions of windows, and they are on 3.5 inch floppy's!
I also have an original copy of Windows 98 on DVD, which may have been what EMC120 ran under.  It is about in that time frame that the TEK 2712 was being phased out for newer versions.

I will give "Industrial Partner" a call tomorrow and see what they say about price.  Their page does say that it is available.  Probably on some dusty shelf in a closet that most don't even know about!

I will keep checking back here to see if anyone may come up with a copy, and will leave word on what I find out tomorrow.

Thanks again,
George

I had it once and gave it away with my Tek 2712 SA when I sold it; maybe i kept a copy...
I will check my old hard drives and keep you informed.

[Pinkus]

... and keep you informed.

PM sent

[hwschulte]

Hello AndersJ can you share the software EMC120. I am strongly interrested !!

Thanks in advance

Herbert

[AndersJ]

Herbert,
how did the software I mailed work for you?
AJ

[Viktor347]

Hello became the owner of 2711 can anyone share Tektronix EMC120 Windows software?