Author Topic: TE Boot up times and Boot cycles # (Read 28938 times)

rsjsouza · « **Reply #25 on:** July 15, 2015, 03:37:52 am »

Quote from: tautech on July 14, 2015, 08:23:56 pm

Quote from: rsjsouza on July 14, 2015, 08:05:56 pm
Yes; I could not find this on both Rigols above. Perhaps I am missing something, but I really could not find such count.
It will be in a Utilitiy or System menu or sub menu.
Likely also displays HW, FW, SN etc

Yep, I found the menu that displays all this info, but the number of power cycles is not there (both the 1102E and the 4014)

dadler · « **Reply #26 on:** July 15, 2015, 04:00:10 am »

Quote from: Mr.B on July 14, 2015, 08:37:59 pm

Quote from: dadler on July 14, 2015, 08:15:57 pm
I finally found one of my pieces of equipment that has a true "boot count":

You can tell I've used it a lot, a whole 11 power cycles!

I discovered this screen when I updated the Firmware recently (thanks Franky!)

I purchased 2 off Franky.
Mine are running v2.4.
Where do I get the updated firmware?

Email him and he will send you a link and instructions.

I had to make a pogo-pin adapter on protoboard:

Mr.B · « **Reply #27 on:** July 15, 2015, 04:06:20 am »

Quote from: dadler on July 15, 2015, 04:00:10 am

Email him and he will send you a link and instructions.

Thanks. Have done just that.

tautech · « **Reply #28 on:** July 15, 2015, 04:22:34 am »

Quote from: Monkeh on July 14, 2015, 08:22:08 pm

Well, may as well join in. No power cycle counter on these.

Quote from: rsjsouza on July 15, 2015, 03:37:52 am

Quote from: tautech on July 14, 2015, 08:23:56 pm
Quote from: rsjsouza on July 14, 2015, 08:05:56 pm
Yes; I could not find this on both Rigols above. Perhaps I am missing something, but I really could not find such count.
It will be in a Utilitiy or System menu or sub menu.
Likely also displays HW, FW, SN etc
Yep, I found the menu that displays all this info, but the number of power cycles is not there (both the 1102E and the 4014)

That's very surprising, but I'd wager there is.
Maybe not accessable to the user but probably in a Service menu like the TDS Teks.

So for all the cracking and hacking of Rigols has nobody found this yet.

tautech · « **Reply #29 on:** July 17, 2015, 11:03:05 am »

Shameless bump.

Siglent SHS810
16.5 seconds

Boot cycles 34

miguelvp · « **Reply #30 on:** July 20, 2015, 03:33:37 am »

At the risk of hurting my chances to get this, I'm going to bump this thread because it's pretty awesome what Siglent is doing.

GreyWoolfe · « **Reply #31 on:** July 20, 2015, 12:51:16 pm »

Hacked Hantek DSO1052B boot time is 13.93 sec and 54 cycles.

Howardlong · « **Reply #32 on:** July 20, 2015, 07:36:56 pm »

I don't know how real the first one is bearing in mind the age of the scope.

McBryce · « **Reply #33 on:** July 20, 2015, 09:24:19 pm »

I have a Tektronix 2465 (no A or B). Can I pull up that info on it too? And if so, what buttons do I need to be pressing?

McBryce.

Howardlong · « **Reply #34 on:** July 20, 2015, 10:01:25 pm »

Quote from: McBryce on July 20, 2015, 09:24:19 pm

I have a Tektronix 2465 (no A or B). Can I pull up that info on it too? And if so, what buttons do I need to be pressing?

McBryce.

It's in appendix A of the 2465/67B manual. I'm out and about at the mo, but something along the lines of holding the delta V and delta T buttons and while holding them press trigger Slope.

Then upper and lower trigger Mode selects test or exercise.

Press Upper triggering button to execute, lower to exit.

A/B trigger button to exit.

I may have transcribed that wrongly, almost through a bottle of Cloudy Bay SB. Bad day at the office. :-)

Howardlong · « **Reply #35 on:** July 20, 2015, 11:53:00 pm »

This much maligned scope had been my trusty steed for nearly a decade until I found eevblog. With it, I developed a number of successful products. Difficult to think it's only had 563 genuine power cycles considering its value in terms of the hardware it helped me develop over those years.

But seeing that crusty 320x240 screen just now after its months in hibernation, eugh! I may grimace now, but not half as much as I did when I bit my tongue and paid £1,800 (~$3k) for it new a decade ago.

Howardlong · « **Reply #36 on:** July 31, 2015, 09:43:37 pm »

Recommend y'all enter this competition, I just received notification I won July's draw!

miguelvp · « **Reply #37 on:** July 31, 2015, 09:57:00 pm »

Quote from: Howardlong on July 31, 2015, 09:43:37 pm

Recommend y'all enter this competition, I just received notification I won July's draw!

I should have kept my ~~mouth shut~~ fingers tied up.

Quote from: miguelvp on July 20, 2015, 03:33:37 am

At the risk of hurting my chances to get this, I'm going to bump this thread because it's pretty awesome what Siglent is doing.

Nah, Congrats!

tautech · « **Reply #38 on:** July 31, 2015, 09:59:16 pm »

Quote from: Howardlong on July 31, 2015, 09:43:37 pm

Recommend y'all enter this competition, I just received notification I won July's draw!

Really, wow.

Congrats.

What will Howard pick.....DSO or AWG

GreyWoolfe · « **Reply #39 on:** July 31, 2015, 10:27:11 pm »

I might as well redo this with a pic to make Sigilent happy. Boot time is still 13.93.

nctnico · « **Reply #40 on:** July 31, 2015, 10:33:08 pm »

Quote from: tautech on July 31, 2015, 09:59:16 pm

Quote from: Howardlong on July 31, 2015, 09:43:37 pm
Recommend y'all enter this competition, I just received notification I won July's draw!
Really, wow.
Congrats.

What will Howard pick.....DSO or AWG

I strongly suggest the AWG

cs.dk · « **Reply #41 on:** August 01, 2015, 07:08:58 am »

Rigol DS1054Z (with all options) - ~23 secs.

tautech · « **Reply #42 on:** August 02, 2015, 10:07:23 pm »

Bump.

Howard won the July draw ^^^^^, be in to win for the August draw.

Siglent want to see boot cycles # for you to be eligible.

Come on guys and gals.

Monkeh · « **Reply #43 on:** August 02, 2015, 10:09:01 pm »

Quote from: tautech on August 02, 2015, 10:07:23 pm

Bump.

Howard won the July draw ^^^^^, be in to win for the August draw.

Siglent want to see boot cycles # for you to be eligible.

Come on guys and gals.

Quote from: Siglent on July 14, 2015, 02:04:00 am

Guys, I mean the boot up times, not time. all right, time is also ok.
at least attach a picture.

Seeing as not all equipment has a counter..

tszaboo · « **Reply #44 on:** August 03, 2015, 02:54:58 pm »

Congrats, Howard!
Tek TDS2014, 35 second and 224 cycles. I just put two in it...

tautech · « **Reply #45 on:** August 03, 2015, 10:02:18 pm »

Calling Deathwish, calling Deathwish.
Where you wanting a new AWG?

Post some screenshots and be in for the August draw.

Deathwish · « **Reply #46 on:** August 03, 2015, 10:10:34 pm »

<= 5 seconds. my dmm comes on almost instantaneously, you never specified what type of TE was valid

In fact my digital verniers come on in less than a fraction of a second. still TE....

tautech · « **Reply #47 on:** August 03, 2015, 10:39:52 pm »

Quote from: Deathwish on August 03, 2015, 10:10:34 pm

<= 5 seconds. my dmm comes on almost instantaneously, you never specified what type of TE was valid

In fact my digital verniers come on in less than a fraction of a second. still TE....

C'mon buddy get with the program.....read the OP.

Deathwish · « **Reply #48 on:** August 03, 2015, 10:51:14 pm »

Quote from: tautech on August 03, 2015, 10:39:52 pm

Quote from: Deathwish on August 03, 2015, 10:10:34 pm
<= 5 seconds. my dmm comes on almost instantaneously, you never specified what type of TE was valid

In fact my digital verniers come on in less than a fraction of a second. still TE....
C'mon buddy get with the program.....read the OP.

I did !.

ALL BRANDS AND TYPES of TE are invited

tautech · « **Reply #49 on:** August 03, 2015, 10:59:46 pm »

Quote from: Deathwish on August 03, 2015, 10:51:14 pm

ALL BRANDS AND TYPES of TE are invited

Then why are we waiting?

C'mon guys and gals.......


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: TE Boot up times and Boot cycles # (Read 28938 times)

Share me