Sydney calibration lab recommendations

[Synthtech]

I am looking for recommendations for calibration labs in Sydney for multimeter calibration for my Agilent 34401A and Keysight U1282A and an Advantest R1642 voltage/current generator. Are there any Sydneysiders here who use local cal services and have any recommendations or comments?

[Kean]

I've not used one, but I'm certainly also interested...

[dave_k]

Try Rohde & Schwarz in North Ryde

[EEVblog]

You could try Emona
http://www.emona.com.au/Pages/calibrations.html

Basic multimeter cal check price starts from $121 inc GST
All prices here:
http://www.emona.com.au/Calibration/calibration-charges.html

$187 for 5.5 digit, not sure if they have the ability to do greater.

[Synthtech]

You could try Emona
http://www.emona.com.au/Pages/calibrations.html

Basic multimeter cal check price starts from $121 inc GST
All prices here:
http://www.emona.com.au/Calibration/calibration-charges.html

$187 for 5.5 digit, not sure if they have the ability to do greater.

Thanks Dave, I do use Emona for certifying my PAT each year, the last time that I asked they said that they can’t do 6.5 digit meters but maybe I should check back and see if that’s still the case, it looks like they are selling Fluke calibration equipment so maybe they have upgraded their own cal service. I guess that they can do the 60,000 count keysight handheld and maybe the Advantest and they are nearby so I will give them a call.

[deadlylover]

Hi mate you could try getting in contact with TR Calibrations down near Prestons.

I think I got my 34401A calibrated there for around $200, it was a NATA accredited cal. (adjustments on the ACV ranges were approx another 200 on top, it was a meter I repaired)

My memory could be waaay off though, I can't find the darn quote in my inbox anymore. For the 34401A they just whack it on their Fluke calibrator IIRC.

I've got the report somewhere...if you'd like to have a look at it I can upload the data. (might be a couple days though my garage is a mess atm)

[Synthtech]

Hi mate you could try getting in contact with TR Calibrations down near Prestons.

I think I got my 34401A calibrated there for around $200, it was a NATA accredited cal. (adjustments on the ACV ranges were approx another 200 on top, it was a meter I repaired)

My memory could be waaay off though, I can't find the darn quote in my inbox anymore. For the 34401A they just whack it on their Fluke calibrator IIRC.

I've got the report somewhere...if you'd like to have a look at it I can upload the data. (might be a couple days though my garage is a mess atm)

Thank you, I will give them a call, sounds like a good lead.