Siglent SDS2000X Plus

[hj]

Siglent could turn a bad into a good by offering the HW/SW MSO option to existing owners for the/a reduced price. Would you please forward this to Siglent HQ?

[Martin72]

And for HD owners ? 

Like my mom once said, you can wish whatever you want...

[tomud]

And for HD owners ? 

Ha ha, I sincerely hope that during the holiday season Siglent will give some promotion for the HD version  - such a plan to make yourself a Christmas present, and with some promotion the gift would be even better.

[Martin72]

The early bird is always the dumbest one...
Or mostly.

[tomud]

The early bird is always the dumbest one...
Or mostly.

He he Martin, you see this shows that the guy is just a big kid buying himself toys 

[mawyatt]

The early bird is always the dumbest one...
Or mostly.

Well maybe, but what about all the fun you've had playing with the HD while all of us are wannabes

Best,

[jas]

The offer link redirects me to siglenteu.com and when I choose "SDS2000X Plus Series" from products, I get a SDS2000 Plus page and there is a mention of this offer, but it says that "All offers are valid until December 31st, 2021".
So it seems this offer is not available in EU 

[rf-loop]

The offer link redirects me to siglenteu.com and when I choose "SDS2000X Plus Series" from products, I get a SDS2000 Plus page and there is a mention of this offer, but it says that "All offers are valid until December 31st, 2021".
So it seems this offer is not available in EU 

UPDATE: Currently it IS valid in the European market area including also Finland

[2N3055]

The offer link redirects me to siglenteu.com and when I choose "SDS2000X Plus Series" from products, I get a SDS2000 Plus page and there is a mention of this offer, but it says that "All offers are valid until December 31st, 2021".
So it seems this offer is not available in EU 

https://www.siglenteu.com/news-article/save-up-to-e496-with-a-new-sds2000x-plus-oscilloscope-and-option-bundle/

[tautech]

And the US region has now been included too ! 
https://siglentna.com/news-article/save-up-to-538-with-a-new-sds2000x-plus-oscilloscope-and-option-bundle/

[jas]

Great! It seems the web pages have been updated.
Earlier today when I clicked the promotion banner (the one which still has 2021 date  ) I got "page not found" error, but now it takes to the correct page.

[tautech]

New firmware for SDS2000X Plus models.

https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS2000X%20Plus_V1.5.2R1_EN-2.zip
Version V1.5.2R1
21MB

Release notes
Measurement enhancement - Added setup/hold time: tsu@R, tsu@F, th@R, th@F
Optimized UI
Added SCPI commands for Measure Cursors and clearing measure items in Simple mode
Supported LXI (only with the Uboot-OS Version 5.4)
Supported time zone setting
Fixed several bugs:
Webserver doesn’t show instrument UI if the scope reboot with a wireless mouse connected
Incorrect “Recall”icon in the File Manager
Scope freezes with AWG enabled and measure cursor on rise time
IP setting of AWG in Bode Plot not remembered after reboot
Network storage only works for SMB1.0
MEAS:SIMPle:ITEM\sOVSN,ON does not work as expected
Roll time incorrect at 1ks/div and 20kpts
Raw data not consistent in x and sinx/x interpolation modes
Math: Dx parameter of Derivation cannot be increased by universal control
Incorrect FFT sample rate

[vicki20july]

New firmware for SDS2000X Plus models.

https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS2000X%20Plus_V1.5.2R1_EN-2.zip
Version V1.5.2R1
21MB

Release notes
Measurement enhancement - Added setup/hold time: tsu@R, tsu@F, th@R, th@F
Optimized UI
Added SCPI commands for Measure Cursors and clearing measure items in Simple mode
Supported LXI (only with the Uboot-OS Version 5.4)
Supported time zone setting
Fixed several bugs:
Webserver doesn’t show instrument UI if the scope reboot with a wireless mouse connected
Incorrect “Recall”icon in the File Manager
Scope freezes with AWG enabled and measure cursor on rise time
IP setting of AWG in Bode Plot not remembered after reboot
Network storage only works for SMB1.0
MEAS:SIMPle:ITEM\sOVSN,ON does not work as expected
Roll time incorrect at 1ks/div and 20kpts
Raw data not consistent in x and sinx/x interpolation modes
Math: Dx parameter of Derivation cannot be increased by universal control
Incorrect FFT sample rate

This seems to be the previous update originally made available on august 24 2022. May be they re-uploaded with newer date.
[ Specified attachment is not available ]

[tautech]

This seems to be the previous update originally made available on august 24 2022. May be they re-uploaded with newer date.

Just checked this and file size matches however the filename is slightly different so it seems this maybe a fix for the Timezone bug that's mentioned here:
https://www.eevblog.com/forum/testgear/siglent-sds2000x-plus-coming/msg4398076/#msg4398076

Please, someone check this ?

[blurpy]

This seems to be the previous update originally made available on august 24 2022. May be they re-uploaded with newer date.

Just checked this and file size matches however the filename is slightly different so it seems this maybe a fix for the Timezone bug that's mentioned here:
https://www.eevblog.com/forum/testgear/siglent-sds2000x-plus-coming/msg4398076/#msg4398076

Please, someone check this ?

The firmware is identical. The only difference is in the pdf instructions. From what I could see, they updated this line:

From:  Supported LXI (only with the new produced units)
To:  Supported LXI (only with the Uboot-OS Version 5.4)

It partially answers my question recently:

Siglent SDS2000X Plus V1.5.2R1 Firmware Update

4. Supported LXI (only with the new produced units)

Regarding this LXI support. What sort of functionality do you get? And why only for new units?

But then, still wonder how we get Uboot-OS Version 5.4, and what LXI actually gives us?

[tautech]

The firmware is identical. The only difference is in the pdf instructions.

Is the Time zone bug that Performa01 reported not fixed ?

[blurpy]

The firmware is identical. The only difference is in the pdf instructions.

Is the Time zone bug that Performa01 reported not fixed ?

Can't be. The ADS-files in the original zip and in the new zip are binary identical.

If it was fixed, I would expect it to have a new version, as well as an entry in the release notes.

[tautech]

The firmware is identical. The only difference is in the pdf instructions.

Is the Time zone bug that Performa01 reported not fixed ?

Can't be. The ADS-files in the original zip and in the new zip are binary identical.

If it was fixed, I would expect it to have a new version, as well as an entry in the release notes.

OK so you didn't check, maybe someone else can.

[blurpy]

OK so you didn't check, maybe someone else can.

Would you ask Siglent about releasing Uboot-OS Version 5.4? They did an OS update on the SDS1000X-E-series, so guess they could if they wanted to.

[dibro]

I did a binary compare and they are indeed identical.

[tubularnut]

The firmware is identical. The only difference is in the pdf instructions.

Is the Time zone bug that Performa01 reported not fixed ?

Can't be. The ADS-files in the original zip and in the new zip are binary identical.

If it was fixed, I would expect it to have a new version, as well as an entry in the release notes.

OK so you didn't check, maybe someone else can.

Applied firmware, timezone entry still broken.

[tautech]

Ad Hoc Curve tracer project using SDS2000X Plus in XY mode and both channels from the SDG2042X AWG.
https://www.eevblog.com/forum/testgear/fooln-around-with-dso-awg/

[pt1elec_dev]

Hi. First post from a newbie! Don't know if this is right place to post this but anyway...

Anyone had this weird behavior with single capture + zone trigger combi?

The signal with no zone settings: look dirty


And normal trigger with zone settings: works fine.


And single capture with zone settings: not capturing any signal. also ready light right below the trigger knob is off.


Any idea why this is not working? I think there's no reason only changing the capture mode disables the singal capturing capability.

Interestingly, seems the newest firmware(V1.5.2R1) also introduced a new bug! (see the screenshot and you'll find somethings missing lol)

[tautech]

Hi. First post from a newbie! Don't know if this is right place to post this but anyway...

Welcome to the forum.

The signal with no zone settings: look dirty

Yes, from unstable triggering.

Data packets right ?
With no/zero/min Holdoff the trigger is rearming and firing within the packet.
You want just simple stable triggering right ?

Hit Stop and eyeball the longest packet duration and in the Trigger menu set Holdoff to a slightly longer duration.
Set Zones to OFF and you should have stable triggering on the first edge as you already have it set to Falling. 

I'll send you a PM soon about the firmware.

[pt1elec_dev]

Thanks for the reply.

...
You want just simple stable triggering right ?
Hit Stop and eyeball the longest packet duration and in the Trigger menu set Holdoff to a slightly longer duration.

Yeah, that's kind of other way to get it work but I'm curious why it is not working with the zone settings method.
I wanted to know if it is (potentially) a bug, or I'm just using it wrong way.