Bonjour
I have this problem which appeared on my SDM3045x.
At first, the screen was stuck on the Siglent logo, I called the after-sales service of the distributor who sent me by email with the recovery file (for version 5.01.01.03 or more)
I used a 4G USB key but the boot didn't do anything, so suddenly I used an 8G micro SD card to attempt to boot from the main board PCB socket... and now the multimeter turns on with a black screen.
- the LED of the analog card flashes 2x per second.
-The microprocessor LED is on.
I also noticed that the label of the analog card is noted "SDM3055X-E"
the serial number of my SDM3045X is SDM34FAD2R1804 and the 3 year warranty has expired.
1: Is the recovery file corrupted or not at the correct version ?
2: Does the recovery file have to be different between a USB key and a µSD card ?
3: Is it the main board that is dead ?
I contacted SIGLENT France for an estimate of the cost of an intervention and I am waiting.
Thanking you.
Cordially