I had this DSO for a few months and I notice that under all conditions I never see a "Sa Rate" above 500MSa/s or a "Mem Depth" over 6M. It is supposed to do 1GSa/s and a depth of 12M (without options).
This is with one channel enabled and no averaging etc.
I now installed the latest fw and this did not change.
Model:DS1074Z
Board Ver:0.1.1
Firmware Ver:0.2.3.11
BOOT Ver:0.0.1.2
CPLD Ver:2.3
SoftWare Ver:00.04.03.SP2
Interestingly, this is the case with a single channel 1, 3 and 4. However ch2 does not have this limitation. What gives?
I searched this forum and scanned the bugs/wishes but did not see this mentioned (but maybe I missed it).
TIA