Hello there,
I was looking at some scopes again, and noticed that one has a data logging feature. It's a cheap thing though.
So was wondering, do the higher end scopes have data logging too?
Here's what i need...
1. A scope, like say 100MHz.
2. It should do data logging as outlined below.
Data logging:
Monitor the power line for at least 24 hours. That's 50 or 60 Hz and say sampling period of 1kHz, or maybe just 600Hz for the 60Hz power line. So that would be 10 samples per cycle of the 60Hz line.
The question is, do the standard scopes handle this data logging too, like say the 300 dollar Siglent or Hantek or whatever?
If not, do ANY of them handle this, and if so, which ones?
Thanks for any ideas/suggestions.