Ahoy and thanks to unisoft and the whole community, who put in efforts for all of us to get the most out of our RD-600Xs. So here are a couple of things I also wanted to share:
I've been playing with RidenGUI for control via USB (
https://github.com/ShayBox/RidenGUI) and can confirm that this works very well. Then I wanted to be able to
a) control the PSU via Home-Assistant and b) also get long-term logging data from the PSU which I could map in Grafana. The obvious choice here was to try to
install esphome onto the ESP12 that comes with the W models. This came up as a part of a discussion with Shaybox (see:
https://github.com/ShayBox/RidenGUI/discussions/8).
This is going to be serving as a PSU for my lifepo4 diy powerwall project, thats why I want to log the long term data, to see the voltage/current curves of the initial top balance
over time and keep them logged automatically. If you're interested in the process how to flash the ESP12 module with esphome, you can watch the live episode
for it:
https://odysee.com/@Apollo-NG:2/pimp-my-riden-1:1 (link fixed - thx @ledtester)
The only thing I havent figured out yet is the password section in unisoft FW - is that available somewhere?