« previous next »
Pages: [1]   Go Down

Author Topic: Removing front panel buttons on a Keithley 192  (Read 1793 times)

0 Members and 2 Guests are viewing this topic.

Offline mcleodTopic starter

  • Contributor
  • Posts: 15
  • Country: us
Removing front panel buttons on a Keithley 192
« on: September 11, 2013, 06:33:53 am »
Hi, has anyone removed the front panel display board on a Keithley 192?

I have a switch that I suspect is bad, but I an not sure how the buttons come off so I can remove the board. I have tried just pulling them off and they don't seem to move, I am a little worried about breaking them, so I figured I would ask.

Thanks!
Logged
 

Offline free_electron

  • Super Contributor
  • ***
  • Posts: 8550
  • Country: us
    • SiliconValleyGarage
Re: Removing front panel buttons on a Keithley 192
« Reply #1 on: September 11, 2013, 07:08:58 am »
They pull off. The brown piece clips over the plunger. I believe there exists a little tool. Take a good look betwen the bronw piece and the fromtpanel. You should see the white opening. A small flat blade screwdriver i. The slit should do it.
Logged
Professional Electron Wrangler.
Any comments, or points of view expressed, are my own and not endorsed , induced or compensated by my employer(s).
 

Offline mcleodTopic starter

  • Contributor
  • Posts: 15
  • Country: us
Re: Removing front panel buttons on a Keithley 192
« Reply #2 on: September 11, 2013, 02:37:32 pm »
Thanks for the tip! Turns out some clown glued a few of them on, but I was able to get it apart.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee