Author Topic: B&K2190 Scope shorted Dual NEC FET (Obsolete) finding a substitute???  (Read 1169 times)

0 Members and 1 Guest are viewing this topic.

Offline slbenderTopic starter

  • Regular Contributor
  • *
  • Posts: 80
  • Country: us
This B&K 2190 is a ~100 Mhz. 2 Channel Analog Oscilloscope that has been gathering dust for several years - due to a shorted NEC Dual Fet (unobtainium) near the input on one channel.  Also lots of bad soldering that likely caused the failure...   Any suggestions on the part, the soldering I can repair.

Thanks,

Steven
« Last Edit: August 14, 2018, 09:27:12 pm by slbender »
 

Offline floobydust

  • Super Contributor
  • ***
  • Posts: 7492
  • Country: ca
Re: B&K2190 Scope shorted Dual NEC FET (Obsolete) finding a substitute???
« Reply #1 on: August 14, 2018, 09:36:23 pm »
What's the part number?
 

Offline slbenderTopic starter

  • Regular Contributor
  • *
  • Posts: 80
  • Country: us
Re: B&K2190 Scope shorted Dual NEC FET (Obsolete) finding a substitute???
« Reply #2 on: September 10, 2018, 06:31:44 am »
What's the part number?


NEC UPA71A Dual Jfet N Channel

-Steven
 

Offline tryode

  • Newbie
  • Posts: 4
Re: B&K2190 Scope shorted Dual NEC FET (Obsolete) finding a substitute???
« Reply #3 on: September 10, 2018, 09:47:38 am »
You can try UT-Source, I've bought in the past from them some dual j-fets and were ok (I've checked them also with a curve tracer in order to be sure it is the real stuff).
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf