« previous next »
Pages: [1]   Go Down

Author Topic: Tek 2440, 2430 Cursors  (Read 1110 times)

0 Members and 1 Guest are viewing this topic.

Offline L_EulerTopic starter

  • Regular Contributor
  • *
  • Posts: 86
  • Country: us
Tek 2440, 2430 Cursors
« on: January 08, 2019, 01:39:58 pm »
New here,

Other than turning down the intensity, how do you turn off the measurement cursors on a Tek 2430 or 2440?  I don't see it mentioned anywhere in the user or service manual.  Occasionally I see them turn off, but can't decipher the path.
Logged
There's no point to getting old if you don't have stories.
 

Offline particleman

  • Regular Contributor
  • *
  • Posts: 115
Re: Tek 2440, 2430 Cursors
« Reply #1 on: January 08, 2019, 02:09:59 pm »
Just press the front button. If volts is underlined press the volts button.
Logged
 

Offline 0culus

  • Super Contributor
  • ***
  • Posts: 3032
  • Country: us
  • Electronics, RF, and TEA Hobbyist
Re: Tek 2440, 2430 Cursors
« Reply #2 on: January 08, 2019, 08:58:46 pm »
If it has a "setup" button like my 2465B, running that routine also turns off any active cursors. Otherwise, if you are using delta V for example, simply press it once to turn the cursors on and again to turn them off.
Logged
 

Offline L_EulerTopic starter

  • Regular Contributor
  • *
  • Posts: 86
  • Country: us
Re: Tek 2440, 2430 Cursors
« Reply #3 on: January 09, 2019, 12:59:19 am »
I am sooooooo stupid.  I though I tried push the active mode button, but I guess not.  Yep, turns them off.
Logged
There's no point to getting old if you don't have stories.
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee