EEVblog Electronics Community Forum
A Free & Open Forum For Electronics Enthusiasts & Professionals
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
This topic
This board
Entire forum
Google
Bing
Home
Help
Search
About us
Links
Login
Register
EEVblog Electronics Community Forum
»
Products
»
Test Equipment
»
DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$]
« previous
next »
Print
Search
Pages:
Prev
1
2
[
3
]
All
Go Down
Author
Topic: DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$] (Read 25419 times)
0 Members and 1 Guest are viewing this topic.
Phil1977
Frequent Contributor
Posts: 441
Country:
Re: DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$]
«
Reply #50 on:
July 18, 2024, 05:01:30 pm »
Maybe the VBUS is not directly routed from the plug to the chip - I do not know if the chip needs it to do the negotiation or if its just connected to CC1 and just does the "paperwork". I´ll have a look this weekend.
Logged
Phil1977
Frequent Contributor
Posts: 441
Country:
Re: DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$]
«
Reply #51 on:
July 18, 2024, 07:55:16 pm »
Good news: While the DP100 is powered by non-managed 30V DC, the maximum voltage on the CH224K VBUS pin is 10V, VDD is around 2V. It seems that the device only powers this chip if it initializes the power delivery.
«
Last Edit: July 18, 2024, 07:56:47 pm by Phil1977
»
Logged
The following users thanked this post:
ha_embedded
icpart
Regular Contributor
Posts: 66
Country:
Re: DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$]
«
Reply #52 on:
July 28, 2024, 02:41:17 pm »
I just make fast search about good load switch ITS428L2. Seems that be good candiate for that job. It is have all protections inside is, maybe t will not need PCB if can handle load current.
https://eu.mouser.com/ProductDetail/Infineon-Technologies/ITS428L2?qs=sGAEpiMZZMvjbjwkTuU2aZXYNMpOS50Yh7EhO2KKWBw%3D
As I tried figured out that if my DP100 have that undershoot issue time ago I tested it with USB-C charger and my portable OWON hds2202s and there didn't have such problem as I remmeber, but maybe need to test it again.
«
Last Edit: July 28, 2024, 02:47:26 pm by icpart
»
Logged
caind
Newbie
Posts: 1
Country:
Re: DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$]
«
Reply #53 on:
July 29, 2024, 12:38:03 pm »
The ITS428L2 needs at least 4.75 V. You certainly don't want to use the DP100 for output voltages ≥ 4.75 V only...
Logged
Print
Search
Pages:
Prev
1
2
[
3
]
All
Go Up
« previous
next »
Share me
Smf
EEVblog Electronics Community Forum
»
Products
»
Test Equipment
»
DP100 PD-Power Supply 100Watt [0-30.00V / 0-5.000A) [∼50$]
There was an error while thanking
Thanking...
EEVblog Main Site
EEVblog on Youtube
EEVblog on Twitter
EEVblog on Facebook
EEVblog on Odysee