How to install Linux-GPIB on actual Debain 12

[Chefbastler]

Hallo,

I have an new installed computer with actual Debain-12 and a NI GPIB-PCI Card in it.

However, Linux-GPIB 4.3.6 cannot be installed correctly for it to work

Calling gpib_config gives no feedback.
Calling ibtest gives "failed to open board" error when trying to open from interface board

Code: [Select]

lsmod | grep gpib
gpib_common            53248  2 tnt4882,nec7210

Code: [Select]

interface {
    minor = 0
    board_type = "ni_pci"
    name = "gpib0"
    pad = 0
    sad = 0
    master = yes
    eos = 0x0a
    set-reos = no
    set-bin = no
    set-xeos = yes
    set-eot = yes
    default-timeout = T3s
    default-dma = 0
    default-signal = 0
    default-rsv = 0
}
[/img]

Can someone help me?

[mendip_discovery]

I'm no expert so I used this,
https://github.com/PhilippCo/meas_rpi

Might give you some ideas.

The user who wrote it in here, see
https://www.eevblog.com/forum/metrology/raspberry-pi23-logging-platform-for-voltnuts/msg2008349/#msg2008349