hey
I don't know what is the proper "board" or what is the proper title for that topic - please tell me what's right
so I have 1K$ for *real* needs
(I know that 1K for begginer/advance is A-lot and so will be my treatment
)
and I struggle to tell what shall I buy with it ...
so lets list you the gear I have and I hope you'll be able to spot me what I shall get
I have :
fluke 87V
fluke 287
HP3478A
E3610A
DSOX2002A ( A gift from my father - I am awaiting for scope since I got into that , so I really appreciate my father's gift , Indeed Huge input to my lab and it seem like it will last decade easily
)
I got some good ATX hacked power supply ( can handle 30+A on each of the rails easly and safly - Tested
)
in the scope I got the function Gen as well hence I'll say I've got 20Mhz gen too
and some good old-but seem to be with in cal 0_0 kenwood 40Mhz analogue scope
Goot Gun soldering iron ( 20W-200W) _Chissel head though
lots of screw drivers and side cutters etc ..
and I guess that's it
my thought's :
blue rubber mat ( like dave's )- 120$ ( the shipping is 80$ !!! )
HP6002A ( the 200W and 10A capabillitis are necesar ) -150$
horaizon 36V~2.5A -160$
2X64 component cabin ( around 40$ each - 80$ total)
and I think of getting one more meter ... I have got 3 options in my head :
(1) getting 33,000 count voltage meter ( 8.99$) and configure it to be switchable - 33V range and 330V range should be good enough )
(2) getting good fluke 27 -FM (the yellow one ) for about 50~80$
(3) maybe buying one more hp3478A ?
( somewhere between 120$~150$(?) )
I shall mention I already have :
2100PCS resistor kit ( 1/4W )
like 20 op07's
signal transistor assortment kit ( the cheap 180 pcs one )
and some junk box of course
I think of getting :
100-1M 1turn pot 10 Value 100pcs trim pot kit - 9.79$
ceramic cap 25 Value 20 each 500 Pcs -5.98$
100X LM358-5.89$
100X2n3906 ( already got 100pcs of the 2n222 ) -2.99$
100X2n3904-2.99$
Total cash =458$I think of saving the rest for future projects - what do you think ?
and I think that's it .... what do you think ?
thank you in advace