Fluke 12 Photo Needed

[vsboost]

Hi Guys,

Was wondering if anybody could please take a nice close up shot of the contact pads on a Fluke 12 multimeter, this one was my dads and he gave it to me to play with years ago after he blew the tracks off it.  I was thinking of making some sort of template and using some conductive paste/glue to re create the blown tracks (circled red).

Cheers

[retiredcaps]

The 12 service manual has a schematic.

http://www.techedu.com/pdf/Fluke/10_11_12_ServiceManual.pdf

Excavatoree provided a picture of the Fluke 10 in this thread

https://www.eevblog.com/forum/chat/fluke-25-my-first-digital-multimeter/msg36115/#msg36115

[vsboost]

Thanks for looking that up for me but the photos don't show the solder pads unfortunately.

Cheers

[Sjokolade]

I got a few pictures of the Fluke 10 - they might have similar pads.

[vsboost]

Thanks Sjokolade,

Do you happen to have one front on?

[Mike S]

Fluke 12 Board

[vsboost]

Thanks Mike S,

This is exactly what i needed, will report back once my conductive glue gets here.

[Sjokolade]

I only have those two pictures.

Mike S - what camera did you use for your pictures ?

[Mike S]

Thanks Mike S,

No problem. 

Mike S - what camera did you use for your pictures ?

An old Canon Rebel XTi with the "kit" lens.

[vsboost]

Well the results are in.

Pic one: I printed a picture of what Mike S sent me to scale approx 13.8mm wide and used the needle of the syringe to make the holes where the solder pads are (that took ages i made many holes like a tattoo gun then gently scraped the paper away)

Pic two: After making the template and squeezing some solder paste/glue

Pic three: Cleaned up some of the mess, not the best looking

Pic four: It works yay!! all buttons and modes function correctly

[retiredcaps]

Pic four: It works yay!! all buttons and modes function correctly

Great repair job.  Thanks for sharing and reporting back.

[Gromitt]

An old Canon Rebel XTi with the "kit" lens.

Thats a Canon EOS 400D for anyone outside of North America BTW, I have one to, old but OK.

/stefan