Siglent SDM3055 - stuck on boot screen

[dvp]

My device SDM 3055 is 7 years old, it worked fine. I haven't used it for about a year, but now, after turning it on, it freezes on the download screen. I need help restoring the device, help me.

Welcome to the forum.

Can I ask if this old meter has ever had its firmware updated ?
If No, it must be returned to Siglent for specialized recovery and calibration.

Yes, it was updated, but a very long time ago, about 3 years ago, and I do not remember the firmware number.

[rf-loop]

My device SDM 3055 is 7 years old, it worked fine. I haven't used it for about a year, but now, after turning it on, it freezes on the download screen. I need help restoring the device, help me.

Welcome to the forum.

Can I ask if this old meter has ever had its firmware updated ?
If No, it must be returned to Siglent for specialized recovery and calibration.

Yes, it was updated, but a very long time ago, about 3 years ago, and I do not remember the firmware number.

If you have updated it as you said, it is obvious that there is U-disk recovery in the firmware.
2017/4/14 FW 1.01.01.19 1. Added U disk recovery function.

Ref attached version history.

[tautech]

My device SDM 3055 is 7 years old, it worked fine. I haven't used it for about a year, but now, after turning it on, it freezes on the download screen. I need help restoring the device, help me.

Welcome to the forum.

Can I ask if this old meter has ever had its firmware updated ?
If No, it must be returned to Siglent for specialized recovery and calibration.

Yes, it was updated, but a very long time ago, about 3 years ago, and I do not remember the firmware number.

Good, clues to providing a successful recovery are below.

My device SDM 3055 is 7 years old, it worked fine. I haven't used it for about a year, but now, after turning it on, it freezes on the download screen. I need help restoring the device, help me.

Welcome to the forum.

Can I ask if this old meter has ever had its firmware updated ?
If No, it must be returned to Siglent for specialized recovery and calibration.

Yes, it was updated, but a very long time ago, about 3 years ago, and I do not remember the firmware number.

If you have updated it as you said, it is obvious that there is U-disk recovery in the firmware.
2017/4/14 FW 1.01.01.19 1. Added U disk recovery function.

Ref attached version history.

Please send personal message with your email address.

[dvp]

tauech. Thank you, I sent PM

[tautech]

tauech. Thank you, I sent PM

Email sent yesterday.

[dvp]

tauech. Thank you, I sent PM

Email sent yesterday.

tautech, Thanks! My "dinosaur" came to life and is back in operation, it was version 1.01.01.25, now it has been updated to the latest version. It's working well so far.

[Monte Quercus]

Hello and thank you for the welcome!

I just wanted to share that I was able to successfully recover my SDM3055 with the provided files and a SamData 8GB USB Flash Drive as offered on Amazon here: https://www.amazon.com/dp/B092879BVB?ref=ppx_yo2ov_dt_b_product_details&th=1.

[concerto51]

Hello, I encounter the same problem. my SDM3055 was not powered up for a few months and today it's stuck on boot screen. I think I already upgraded it to version 1.01.01.19 a few years ago but I'm not sure.

Please can you send me the recovery files.

best regards
Lorenzo