Enabling options on Agilent ESA series E4402B E4404B E4405B E4407B

[4x6uj]

Hi,
Sorry for the misunderstanding. I have just realized there is no need for a key in order to enable option 219, it's enough to install the Noise Figure personality downloaded from Keysight. It will work right away if you have the noise source control card installed.
Hope this info helps others too.
Thank again,

[azemati]

Hi,
Could you please generate keys for E4405B for options 1D6, 1DN, 1DR, 226, 219?  HostID: C51167B8

Thank you

[PA0PBZ]

keys for E4405B for options 1D6, 1DN, 1DR, 226, 219?  HostID: C51167B8

1D6 92BBA65B702D
1DN CA4B6E230065
1DR 9693A2572851
226 0140758E46F4
219 C27F7F9C2504

[azemati]

Thank you so much
I entered these values ​​in the device and wrote the option activated message under the field, but the code of the activated options does not appear on the options page.
Please guide me

[PA0PBZ]

I do not own an ESA myself, so I can't assist you but I'm sure there will be others that can help you.

[thietbidoluong.rf]

Hello PA0PBZ!
I have E4407B with serial number MY50142706 and HostID: CE61D718.
Could you generate license code for options 219 and option 226?
Thank you very much!

[PA0PBZ]

Hello PA0PBZ!
I have E4407B with serial number MY50142706 and HostID: CE61D718.
Could you generate license code for options 219 and option 226?
Thank you very much!

Hi,

3 months ago you asked for another E4407B, is this for personal use? Your user name suggests it is linked to a company?

[thietbidoluong.rf]

Hello PA0PBZ!
This is for personal use. It is not linked to a company
3 months ago, I asked for another E4407B but this equipment don't enough HW for use with license code 219. I bought new equipment and hope it can operator with license code for option 219 and 226
Please help me because I need use license 219 and 226 for my work.
Thank you so much

[PA0PBZ]

Please help me because I need use license 219 and 226 for my work.

How is it personal if you need it for your work? 

[thietbidoluong.rf]

Hello PA0PBZ!
I would like to use option 226 for measure phase noise and option 219 for measure noise figure.
My work is RF design (Amplifier module) and I would like to use these function for measure my Amplifier module
Thank you so much!

[PA0PBZ]

You mentioned work so it feels a bit like a grey area, but here is what you asked, probably the last time for you.
Let me know if it worked.

219 437EC0467534
226 273FCA389624