Enabling options on Agilent ESA series E4402B E4404B E4405B E4407B

[PA0PBZ]

ID  73D3F3F2
     1DR

14F3AE6F3221

[BG8IP]

THANK YOU VERY MUCH !I JUST ENTERED IT BUT THE PROMPT IS INVALID,I M NOT SURE IF THIS OPTION REQUIRES OCXO  SUPPORT! 
 I MADE A PCB COMPONENT AND IT S STILL BEING SHIPPED TRY DIY AGAIN IN A FEW DAYS ..THANK YOU AGAIN   

[PA0PBZ]

I'm sure the key is correct but I don't have this device myself so I can't test it.
Maybe this helps: https://www.keysight.com/us/en/assets/9018-40324/installation-guides/9018-40324.pdf

[BG8IP]

I HAD SOME TIME THIS AFTERNOON TO BOOK 4411 FOR A WHILE...I SUDDENLY REALIZED THAT I HAD MADE A MISTAKE WITH THE ENDING NUMBER.IT S "A"NOT "B" I M REALLY SORRY 

[BG8IP]

FOLLOW THE MANUAL EARLIER .DIY ONE AT WILL.VERIFY IF IT CAN WORK,IT S TOO UGLY,,CUSTOMIZED PCB ARE STILL ON THE WAY,,,

[PA0PBZ]

"A" or "B" should not make a difference. Do you get an error message when you enter the license key? If so, what exactly does it say?

[BG8IP]

dire paopbz it"s a bit not convinced,i tried aging successful,my steps are incorrect,1:enter option code   2:enter the license key and 3:load it successful. no need for oxco hardware support successfully added the same very good     thank you
 


by the way may i ask how to add an option to the ESA-L1500A series without an ID number compared to the first level of 4411?

[PA0PBZ]

by the way may i ask how to add an option to the ESA-L1500A series without an ID number compared to the first level of 4411?

I have no idea, the option keys I can generate are based on the HOSTID so if you don't have that I'm afraid I can't help.

[BG8IP]

JUST LIKE THIS   

[PA0PBZ]

I had a look in the manual https://www.keysight.com/us/en/assets/9018-40189/user-manuals/9018-40189.pdf and I don't think there are software installable options.

[BG8IP]

Understood   

[BG8IP]

HELL PAOPBZ SEEING CABLE FAULT LOCATION FUNCTION  IS A PRACTICAL FEATURE FOR HAM     
      225
      226
      227
      228
      J36                                                                                                           
                                                                               THANK YOU

[BG8IP]

 

[PA0PBZ]

Hi BG8IP,

The key generation I offer is for hobby use, and you have already showed 3 different models so I'm not sure if this qualifies as hobby.
Also a tip: if you are having problems reading or writing English, find someone who can help you.

[BG8IP]

YES I HAVE 1500 UNITS MYSELF 4402 PER UNIT 4411 PER UNIT THE ELECTRONICS FACTORY IS CLOSING DOWN I BOUGHT IT BACK

[BG8IP]

1500  IN MY STORAGE ROOM     

[WalterS]

Dear PA0PBZ
I have a E4407B Spectrum Analyzer, Model:E4407B ESA-E, Host ID: 855050AD.
I would like to install the 226 Phase noise personality.

Thanks

[PA0PBZ]

I have a E4407B Spectrum Analyzer, Model:E4407B ESA-E, Host ID: 855050AD.
I would like to install the 226 Phase noise personality.

This should do the trick: 7F680E518DBA

[Larry_Bridge]

Hello My friend,
I have E4405B With Serial Number: MY45101581 and Host ID: AA875D9A
can you please send me licenses code for following options?

1DR
1DS
1D5
226
UKB
1D6

Thank you

[PA0PBZ]

I have E4405B With Serial Number: MY45101581 and Host ID: AA875D9A

1DR AC5735DB5AE1
1DS AF5132D854E4
1D5 8D9554FA98C2
226 35060802B884
UKB C5DB28C63B8C
1D6 A87F39DFA2BD

[Larry_Bridge]

good working. thank you so much.

[ua4yhz]

Option UKB is enabled in the service menu and does not require a license key. But for this option to work correctly, you need to replace the attenuator.

[dl8ebl]

Dear PA0PBZ,

can You please support regarding my E4407b , HostID : 241064B8, Serial : MY41440013
With the following options :

UKR
226
1D6
1DS

Thanks and vy73, Olaf, DL8ebl

[PA0PBZ]

Hi Olaf, try the keys below and let us know:

UKR 3764535E3461
226 0C002B5255E5
1D6 B9B73C477F1E
1DS C08935403145

[dl8ebl]

Hi, works like a charm, thank You. Unless the UKR which should have been a UKB. Typo on my side.
Thanks You and best 73’s, Olaf