Comparing the BOM (original) with the schematic....
R21(10R) is missed in the BOM but in the schematic avaible and must be there because it´s the output resistor.
Then it´s getting "wilder"...
2µ2 tantalum are only mentioned as C9,C10 in the BOM but also avaible as C30,C33,C36 in the schematic..
According to the datsheet of the MAX6350 (U9) C30 and C36 are right with 2µ2 (and wrong in the BOM), for C33 (100nF in the BOM) the datasheet recommending 1µF, in the schematic it´s 2µ2.
And another thing:
C28 is 10µF in the schematic (and right), but 100nF in the BOM....
I´ll continue checking BOM vs schematic.