Well when changing the chip forgot to somw heat resistant tape over C10 & C12 they were 45 degrees shifted so i placed then sideways on the board lol
I Burned the chip another time and now the 2000uF cap is quite okay, the esr is working also.
When burning the chip i got an error:
device 0x04 != input 0x00 at addr 0x0079 (error)
avrdude error: verification mismatch
And on the tester i saw a few weird icons... going to check it tomorrow... i've done with damn tester lol but learned a-lot
Going to catch sum sleep
Thnx Madires!