The YR2050 is probably more appropriate, and does a DCR measurement. Mine outputs about 2V O/C and 90mA shorted. A pretty good price considering it includes the Kelvin test clips.
Thanks for helping me spend another $34. Added to cart!
The price is great. I don't think you will regret it!
With the Kelvin clips shorted I was getting about 1.2 mohm reading - but by moving the clips a bit I could get it to read about 600 uohm.
I did not think I had many suitable low value precision resistors, but I found a few and measured them as follows.
Vishay Z201 1 kohm 0.01% = 999.95 ohm
Vishay Z201 100 ohm 0.01% = 99.994 ohm
TE CPF2512 100 ohm 0.1% = 99.976 ohm
Vishay 2512 0.1 ohm 0.1% = 0.10025 ohm
Vishay 2512 0.01 ohm 0.1% = 0.01008 ohm
Ambient temp was about 26C. Readings were stable to +/-1 LSD.
I'm happy with the above results. It is late and my 34465A isn't powered on, so I won't dig out my Keysight Kelvin clips for comparison.