Good evening.
just going to have a quick look at my Fluke 19.
I bought this close to about 15 years ago from Dick Smith Electronics, i cant remember how much bit i think it was more than NZ$200 at the time.
It's been my very trusty and reliable multimeter for many years.
I've long lost the manual for it and it's almost impossible to find any info on it on google.
i've pulled the specs from a trademe ad (the ad claims it's true RMS which it isn't unfortunately):
4,000 count, 3-3/4 digit
AC / DC Volts: 400.0 mV to 1000 V full scale
AC / DC Amps: 40.00 mA to 10.00 A full scale
Resistance: 400.0 Ohm to 40.00 M Ohm full scale
Capacitance: 5.00 nF to 5.00 uF full scale
Diode test: 3.000 V full scale
Frequency: 199.99 Hz to 199.99 kHz full scale
A quick power on test shows the full LCD display, lots of scratches on it too.
Back side with all markings:
I'm pretty sure this wasn't a chinese domestic market only meter like the 17B etc series as the manual was all in english.
Open up the back and this is what we find inside, note the HRC fuse is missing as i blew it long ago and cant be bothered replacing it.
Just a slightly better shot:
and the flip side of the PCB, i didn't want to take off the screen as those zebra tracks can be fiddly sometimes.
pretty much spot on all measurements except the 100Hz Square wave AC as it's not true RMS:
And lastly a size comparison compared to my other meters on hand: