Author Topic: NanoVNA Custom Software  (Read 533397 times)

0 Members and 2 Guests are viewing this topic.

Offline joeqsmithTopic starter

  • Super Contributor
  • ***
  • Posts: 11814
  • Country: us
Re: NanoVNA Custom Software
« Reply #2400 on: July 17, 2024, 07:28:49 pm »
Quote
... if you spent as much time updating your software - as you do attempting to defame an honest request - then I wouldn't have had to request a software update to handle interleaved coils.   
You may feel I owe you my time or should have a say in how I spend it, but that's just part of being delusional.   Once in a while someone actually comes up with an good idea and I will implement it.   In your case, you're just not presenting anything I find as having any value. 

Quote
Once again - I see I'm barking up the wrong tree.
As I stated, you have not figured that out yet but we can continue if you like. 

I did manage to find your current ham license so at least you have that to fall back on. 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2401 on: July 17, 2024, 08:08:42 pm »
Quote
... if you spent as much time updating your software - as you do attempting to defame an honest request - then I wouldn't have had to request a software update to handle interleaved coils.   
You may feel I owe you my time or should have a say in how I spend it, but that's just part of being delusional.   Once in a while someone actually comes up with an good idea and I will implement it.   In your case, you're just not presenting anything I find as having any value. 

Quote
Once again - I see I'm barking up the wrong tree.
As I stated, you have not figured that out yet but we can continue if you like. 

I did manage to find your current ham license so at least you have that to fall back on.

On discussion groups - you only owe people civil, related responses, or you get reported for acting hostile.   
So, that's what you get.    So, continue all you wish. 
 

Offline joeqsmithTopic starter

  • Super Contributor
  • ***
  • Posts: 11814
  • Country: us
Re: NanoVNA Custom Software
« Reply #2402 on: July 17, 2024, 08:32:21 pm »
On discussion groups - you only owe people civil, related responses, or you get reported for acting hostile.   
So, that's what you get.    So, continue all you wish.

You actually wasted the admin's time for my calling out your delusional comments of space travel and how your have been mistreated all your life being handcuffed and escorted off the property for your obvious superior intellect?    :-DD :-DD :-DD   No one here owes you anything.

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2403 on: July 17, 2024, 08:36:40 pm »
On discussion groups - you only owe people civil, related responses, or you get reported for acting hostile.   
So, that's what you get.    So, continue all you wish.

You actually wasted the admin's time for my calling out your delusional comments of space travel and how your have been mistreated all your life being handcuffed and escorted off the property for your obvious superior intellect?    :-DD :-DD :-DD   No one here owes you anything.

That's a typical response from an AI chat bot.   Right, Eliza?   
 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2404 on: July 17, 2024, 09:30:16 pm »
Go ahead, continue if you wish. 
 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2405 on: July 17, 2024, 09:32:43 pm »
Go ahead, continue if you wish. 
 

Offline shakalnokturn

  • Super Contributor
  • ***
  • Posts: 2197
  • Country: fr
 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2407 on: July 17, 2024, 11:48:16 pm »
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 38545
  • Country: au
    • EEVblog
Re: NanoVNA Custom Software
« Reply #2408 on: July 18, 2024, 03:37:43 am »
On discussion groups - you only owe people civil, related responses, or you get reported for acting hostile.   
So, that's what you get.    So, continue all you wish.

As per our private conversation, you are one step away from being banned.
You have no right to demand that Joe spend his time updating his software to suit you.
 
The following users thanked this post: mikerj, joeqsmith

Online Gyro

  • Super Contributor
  • ***
  • Posts: 9911
  • Country: gb
Re: NanoVNA Custom Software
« Reply #2409 on: July 18, 2024, 06:53:59 pm »
On discussion groups - you only owe people civil, related responses, or you get reported for acting hostile.   
So, that's what you get.    So, continue all you wish.

You actually wasted the admin's time for my calling out your delusional comments of space travel and how your have been mistreated all your life being handcuffed and escorted off the property for your obvious superior intellect?    :-DD :-DD :-DD   No one here owes you anything.

That's a typical response from an AI chat bot.   Right, Eliza?

An AI chat bot who has been an active and valued member of the forum since 2015. His development was clearly ahead of it's time.  :-DD
Best Regards, Chris
 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2410 on: July 18, 2024, 07:01:26 pm »


An AI chat bot who has been an active and valued member of the forum since 2015. His development was clearly ahead of it's time.  :-DD
[/quote]

That's nice.   However, I have no reason to trust his software at this point.   I'll stick to the classic NanoVNA-App. 
For my purposes - it's more effective software than Joe's over-bloated, untested "mystery-ware". 

I mean, who is this guy really - other than what I've experienced as a defamator & a liar?   
 

Offline joeqsmithTopic starter

  • Super Contributor
  • ***
  • Posts: 11814
  • Country: us
Re: NanoVNA Custom Software
« Reply #2411 on: July 18, 2024, 08:20:47 pm »
Quote
However, I have no reason to trust his software at this point.   I'll stick to the classic NanoVNA-App.
For my purposes - it's more effective software than Joe's over-bloated, untested "mystery-ware".

That is the most intelligent post you have made yet!!! 

Rather than Tesla's patent 512,340,  you really should be basing your coil designs off this:
https://patents.google.com/patent/US20090040122A1/en

 :-DD :-DD :-DD

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2412 on: July 18, 2024, 08:26:43 pm »
Quote
However, I have no reason to trust his software at this point.   I'll stick to the classic NanoVNA-App.
For my purposes - it's more effective software than Joe's over-bloated, untested "mystery-ware".

That is the most intelligent post you have made yet!!! 

Rather than Tesla's patent 512,340,  you really should be basing your coil designs off this:
https://patents.google.com/patent/US20090040122A1/en

 :-DD :-DD :-DD

I have no use for the opinion of a defamator and a liar.   You are welcome - to not reply to any of my posts. 
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 38545
  • Country: au
    • EEVblog
Re: NanoVNA Custom Software
« Reply #2413 on: July 18, 2024, 10:33:28 pm »
I mean, who is this guy really

As I told you, a very well respected member of the community, and with hundreds of videos on Youtube:
https://www.youtube.com/@joesmith-je3tq/videos
 

Offline hem213

  • Contributor
  • Posts: 20
  • Country: us
Re: NanoVNA Custom Software
« Reply #2414 on: July 18, 2024, 10:49:58 pm »

Quote
That's nice.   However, I have no reason to trust his software at this point.   I'll stick to the classic NanoVNA-App. 
For my purposes - it's more effective software than Joe's over-bloated, untested "mystery-ware". 

I mean, who is this guy really - other than what I've experienced as a defamator & a liar?

Can you just stop, no one is enjoying your tantrum
 

Offline joeqsmithTopic starter

  • Super Contributor
  • ***
  • Posts: 11814
  • Country: us
Re: NanoVNA Custom Software
« Reply #2415 on: July 19, 2024, 12:17:21 am »
Solver64 5.04 is now live.  This version adds support for my EPR spectrometer.  I'm sure that is not useful, but it also enables the magnification feature for the Smith chart in the main menu.   Two additional gains were added.   This feature was added in an  attempt to repeat member pdenisowski cable impedance measurements.  Because the Smith chart is an overlay,  the scaling is still fixed.  It does however make moving the cursors easier if you are trying to zoom into the noise like I was.   

https://www.eevblog.com/forum/rf-microwave/vna-for-cable-characterization/msg5565895/#msg5565895

... well respected member of the community  ...
That's a bit thick don't you think?!   :-DD :-DD   I'm just glad you provide us a place to share our common interests.   

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2416 on: July 19, 2024, 12:22:15 am »

Quote
That's nice.   However, I have no reason to trust his software at this point.   I'll stick to the classic NanoVNA-App. 
For my purposes - it's more effective software than Joe's over-bloated, untested "mystery-ware". 

I mean, who is this guy really - other than what I've experienced as a defamator & a liar?

Can you just stop, no one is enjoying your tantrum

I'm simply responding in turn - to the way I was responded to here.   
So, if you are going to act like I hypocrite, then there's nothing I can do to satisfy you anyway.
You've help create that trap.     

However, without guilt - I can now continue forward, since I've been given very civil & useful responses - from members of different forums.   
This easily verifies that the EEVBlog members could have responded similarly - but instead - chose to act hostile.

Hypocritical responders are a distraction.  You are welcome - to not respond to my posts. 
   
 

Offline joeqsmithTopic starter

  • Super Contributor
  • ***
  • Posts: 11814
  • Country: us
Re: NanoVNA Custom Software
« Reply #2417 on: July 19, 2024, 01:22:51 am »
I can now continue forward, ...

I doubt that.   :-DD 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2418 on: July 19, 2024, 01:37:00 am »
I can now continue forward, ...

I doubt that.   :-DD

You've already been reminded that your lack of responses are more welcome - than your responses.
 
 

Online tatel

  • Frequent Contributor
  • **
  • Posts: 573
  • Country: es
Re: NanoVNA Custom Software
« Reply #2419 on: July 19, 2024, 09:16:40 am »
You've already been reminded that your lack of posts are more welcome - than your posts

It's a shame that a so long -and quite useful thread- can be so affected by just a guy suffering from some mental disorder, it isn't?
 
The following users thanked this post: Grandchuck

Offline joeqsmithTopic starter

  • Super Contributor
  • ***
  • Posts: 11814
  • Country: us
Re: NanoVNA Custom Software
« Reply #2420 on: July 19, 2024, 12:51:49 pm »
It's a shame that a so long -and quite useful thread- can be so affected by just a guy suffering from some mental disorder, it isn't?

It's really up to the mods and Dave on how or if they want to address it.   

The site is what we make of it.  If people want to discuss free energy plasma warp drives in a VNA thread, so be it.   In this case we have someone who seems to have had a long history of mental issues.  It doesn't take long to see why their backstory involves college security and handcuffs.  Of course they blamed the faculty.  They have always been the victim.  I'm sure they will blame Dave, me, others here as well. 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2421 on: July 19, 2024, 01:50:37 pm »
It's a shame that a so long -and quite useful thread- can be so affected by just a guy suffering from some mental disorder, it isn't?

It's really up to the mods and Dave on how or if they want to address it.   

The site is what we make of it.  If people want to discuss free energy plasma warp drives in a VNA thread, so be it.   In this case we have someone who seems to have had a long history of mental issues.  It doesn't take long to see why their backstory involves college security and handcuffs.  Of course they blamed the faculty.  They have always been the victim.  I'm sure they will blame Dave, me, others here as well.

https://appliedphysics.org/warp-grants/
Grant money talks - but Joe's slander doesn't cost him anything.
 
 

Online mawyatt

  • Super Contributor
  • ***
  • Posts: 3795
  • Country: us
Re: NanoVNA Custom Software
« Reply #2422 on: July 19, 2024, 02:22:31 pm »

https://appliedphysics.org/warp-grants/
Grant money talks - but Joe's slander doesn't cost him anything.
 

Why are you here?

Apply for the grant, and try DARPA as well!!

Best,
Curiosity killed the cat, also depleted my wallet!
~Wyatt Labs by Mike~
 

Offline joabel1971

  • Contributor
  • !
  • Posts: 47
  • Country: us
Re: NanoVNA Custom Software
« Reply #2423 on: July 19, 2024, 02:30:09 pm »

https://appliedphysics.org/warp-grants/
Grant money talks - but Joe's slander doesn't cost him anything.
 

Why are you here?

Apply for the grant, and try DARPA as well!!

Best,

 I'm trying to analyze patent#512,340 for an interleaved coil.   I think the question becomes - why are you here - besides slandering things you don't appear to understand?   
 

Online mawyatt

  • Super Contributor
  • ***
  • Posts: 3795
  • Country: us
Re: NanoVNA Custom Software
« Reply #2424 on: July 19, 2024, 02:41:28 pm »

 I'm trying to analyze patent#512,340 for an interleaved coil.   I think the question becomes - why are you here - besides slandering things you don't appear to understand?

There was no slander, simply asking why are you here ???

Go after those grants, you are obviously well positioned to acquire such!!

BTW we're here because we know what we are doing (backed up by 32 granted US Patents) and appreciate the quality of some folks that are also here :-+

So again, why are you here :-//

Best,
Curiosity killed the cat, also depleted my wallet!
~Wyatt Labs by Mike~
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf