Author Topic: Acer K330 - teardown  (Read 5014 times)

0 Members and 1 Guest are viewing this topic.

Offline hacklordsniperTopic starter

  • Frequent Contributor
  • **
  • Posts: 574
  • Country: hr
  • Don't turn it on, take it apart!
    • HackLordSniper
Acer K330 - teardown
« on: December 05, 2011, 05:15:54 pm »
Pics are here:

http://www.hacklordsniper.com/Arhiva_projekata/Projekt_(36).html

For the most pretty picture of teardown go directly here:

http://www.hacklordsniper.com/Slike_projekata/Projekt_(36)/Slika%20(18).JPG  ;D

The projector is great, noise is quite acceptable, build quality is great except little flaw. The front leg is not in middle so projector can swing on left or right site. The is no focus drift with heating as reported on some forums, basically it does not heat much.

Any questions, ask.

PS. For the nerds the test photo is in the topic. However don't trust the camera, the projected image is superb, sharp and clear (you can surf and read on line without any problem or eye fatigue)

There is a photo in dark and in light room, there is not enough brightness for a bright room.





Oh, the joy of sending various electronics to silicon heaven
 

Offline FenderBender

  • Super Contributor
  • ***
  • Posts: 1115
  • Country: us
    • The Solid State Workshop
Re: Acer K330 - teardown
« Reply #1 on: December 06, 2011, 10:25:38 pm »
Looks pretty nice!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf