Hello, I have an ANENG AN8008 that started to misbehave. The voltage measurement is all over the place when the leads aren't connected to anything, but when I join them, the readings jump between 0 and 300mV every second.
When I'm measuring eg. 12V battery I get some reading offset. 12V on battery shows as 13V something, and when I flip the leads I get -10V something.
I tried resoldering SMD components but it didn't help. Capacitors looks alright, no discoloration, no cracks. It wasn't abused or modded in any way. Should I change all the caps on the board?