« previous next »
Pages: [1]   Go Down

Author Topic: Xbox One Original Powers on then off - Mosfets ok  (Read 706 times)

0 Members and 1 Guest are viewing this topic.

Offline smurf786Topic starter

  • Newbie
  • !
  • Posts: 2
  • Country: gb
Xbox One Original Powers on then off - Mosfets ok
« on: May 18, 2020, 06:42:00 pm »
Hi Guys,

I have a xbox one original console it powers on then straight off, please see vid:

https://youtu.be/sKtBJYUd8Sw

I have checked mosfets and they seem to be ok, there was alot of dust in heatsink which i have cleaned out, applied new thermal paste to APU, changed the hard drive but still the same...

Anyone know what i should be checking for or any other common problems i should look for...

Thank you
Logged
 

Offline Lin0

  • Newbie
  • Posts: 1
  • Country: us
Re: Xbox One Original Powers on then off - Mosfets ok
« Reply #1 on: September 03, 2020, 11:43:41 am »
Wow no responses at all to the OP.  I'm having same issue.  Xbox One powering off after 3 seconds.  Not the mosfets or the switch board that plugs into the motherboard.  No shorted caps near HDMI...
Logged
 

Online fzabkar

  • Super Contributor
  • ***
  • Posts: 2380
  • Country: au
Re: Xbox One Original Powers on then off - Mosfets ok
« Reply #2 on: September 03, 2020, 06:21:15 pm »
Locate all the coils and measure the resistance to ground. That should tell you which, if any, of the loads are shorted.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee