Author Topic: HMO1002 Osciloscope  (Read 1253 times)

0 Members and 1 Guest are viewing this topic.

Offline chivuTopic starter

  • Newbie
  • Posts: 1
  • Country: ro
HMO1002 Osciloscope
« on: March 16, 2016, 09:44:22 am »
Hi, pls excuse my poor English, i had bought a new R&S HMO1002 oscilloscope, I used it only for 30 min. and suddenly stopped (no power supply). I tried to restart it but nothing, is lighting up the power button for short time (it should be lit when power is aviable) and a closing/opening relay contact is hearing. It could be from psu ?. It is still in warranty so I cannot open it for the moment. 
 

Online tautech

  • Super Contributor
  • ***
  • Posts: 29026
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: HMO1002 Osciloscope
« Reply #1 on: March 16, 2016, 09:47:27 am »
Hi, pls excuse my poor English, i had bought a new R&S HMO1002 oscilloscope, I used it only for 30 min. and suddenly stopped (no power supply). I tried to restart it but nothing, is lighting up the power button for short time (it should be lit when power is aviable) and a closing/opening relay contact is hearing. It could be from psu ?. It is still in warranty so I cannot open it for the moment.
Welcome to the forum.

You must return it to your supplier ASAP.
Avid Rabid Hobbyist.
Out of office and unavailable for a few days.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf