Author Topic: Laser repair schmatic New Wave Research  (Read 878 times)

0 Members and 1 Guest are viewing this topic.

Offline jdoleckiTopic starter

  • Contributor
  • Posts: 13
  • Country: us
Laser repair schmatic New Wave Research
« on: February 07, 2023, 03:30:30 pm »
Need to find schematic for New Wave Research Pegasus PIV laser .

Or any type of documentation.

Since the company is long gone and the internet is not producing any results I’m hoping someone here might know something or someone.

Thanks John.



 

Offline MathWizard

  • Super Contributor
  • ***
  • Posts: 1622
  • Country: ca
Re: Laser repair schmatic New Wave Research
« Reply #1 on: February 10, 2023, 01:01:37 pm »
Besides universities, how many companies need lasers, besides laser pointers ?

What's wrong with the laser?
 

Offline jdoleckiTopic starter

  • Contributor
  • Posts: 13
  • Country: us
Re: Laser repair schmatic New Wave Research
« Reply #2 on: February 11, 2023, 01:31:14 am »
It was acquired my local college.

Haven’t been used in years.

And they want to get it running to do experiments.

New was 100k even flea bay ones are 10 k now.

Powers on but I can’t make the temp fault go away. At first I thought it was a thermzister  but that working.

All Inputs put go into a Zylog fpga.

I currently looking at the chiller and seeing if that’s is

Sending an error message but it’s a serial communication.

So any inflow would be helpful just thought someone on her might know something.

 

Offline jdoleckiTopic starter

  • Contributor
  • Posts: 13
  • Country: us
Re: Laser repair schmatic New Wave Research
« Reply #3 on: February 11, 2023, 01:32:05 am »
 

Offline MathWizard

  • Super Contributor
  • ***
  • Posts: 1622
  • Country: ca
Re: Laser repair schmatic New Wave Research
« Reply #4 on: February 11, 2023, 08:16:09 pm »
Is that water cooling ? Yeah I'm no expert on repair.

I would pray that the problem is some component on the outside, and not that FPGA.
 

Offline jdoleckiTopic starter

  • Contributor
  • Posts: 13
  • Country: us
Re: Laser repair schmatic New Wave Research
« Reply #5 on: February 11, 2023, 08:25:15 pm »
Yes the power of the laser requires its own chiller.

I working on the serial interface now to see if it’s sending a temp fault.

The one picture shows what I believe is a thermzister. I can put my meter on it and see the resistance rising as the water is chilling.

It’s in the little blue plug with the two white wires coming from it.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf