Fluke 865 Graphical Digital Multimeter > needs Calibration

[sampler1]

Hi All,
I have never had any of my gear calibrated so I am comming at you as an ignorant son of a B. haha
I have a Fluke 865 Graphical Digital Multimeter that works perfectly but the DC Volts has slowly gone out of calibration.( roughly +- 1/2 volt)  Does anyone have an idea where I could get it calibrated in Canada? Preferably Quebec? Also what would your guess be on the cost?
I looked in the service manual and I just don't have the calibration equipment to do the job. It does look quite simple.

Cheers and Happy Holidays.

[boggis the cat]

Check here for accredited labs:

https://nrc.canada.ca/en/certifications-evaluations-standards/calibration-laboratory-assessment-service/directory-accredited-calibration-laboratories?f%5B0%5D=field_of_calibration%3A30075

There are a fair number in Quebec.  Note that commercial work isn't usually cheap, but possibly if they are too pricey they can suggest alternatives.

[bdunham7]

0.5 volt on which scale(s)?  Unless that is on the 300V or 1000V range, that is a significant error and I'd be dubious that calibration alone would be the fix.

[Swake]

I second that message. If it is half a volt in any lower range it is not a calibration issue unless this has been tampered with. What ranges exactly have that issue?