Ok I've reached another impasse, that is to say I've stumped myself.
The 200v line seems to be my chief concern with its odd behavior, of course the reason why the transistors getting hot is also pressing.
Q3 is part of the +18V regulator, Q6 is part of the +5 and both are getting hot.
If there was a problem with either than i would expect to see it reflected as ripple or the like but instead it looks copacetic, their not even being dragged down.
The 200V railed seems to be fine at start up only to be dragged down lower and lower the hotter the transistors get.
Either ways i included schematics for those among us that actually understand transistor only power supplies, they make me go