Replacing a decoupling capacitor which has shorted out

[Yamin]

I have got a faulty Dyson bladeless fan control board with a shorted out decoupling capacitor. I have removed the capacitor which  have cleared out the short. I don't know which value of capacitor to use as there are no schematic available and its a 0603 package capacitor.

The capacitor is placed on the main board  on the trace which goes to the small board which has got the IR sensor, buttons etc.



Thanks in advance for the help.

[TheMG]

The exact value is probably not critical. I'd just throw a 0.1uF cap in there and be done with it.