Hello.
I was looking for repair tip for sig. generator sml02 and found this site. So first I want to say Hello to all of you.
So I bought this sml on ebay with broken LCD. After replacing with new I can see that I have more problems
After powering up I get error msg.
Module (0/CPU)
Missing data block
10401 / freq data ext
Then sml finish booting up and under error page I have 1 stored error.
315 configuration memory lost; EEPROM data
I check service manual and all info that I can get is that one or more data block is missing. But no info how to repair this. I try with calibration and all tests pass, but error remain. Can someone help me with this error.
Thanks and regards, Sebastijan.