Author Topic: Agilent Keysight 3034a X-Series does not show traces (Read 313 times)

Machlee · « **on:** July 03, 2024, 04:18:12 am »

Hi.
I was unlucky enough to break the oscilloscope when I tried to unsolder the battery. After this operation, when turned on, everything worked except for the presence of traces. Or sometimes they appear but very nosy.

TheSteve · « **Reply #1 on:** July 03, 2024, 05:38:58 pm »

Ouch, was the board flexed a bunch when you were working on it?

Machlee · « **Reply #2 on:** July 04, 2024, 02:09:58 am »

Surely, the battery terminals were difficult to remove, and my friend had to make an effort by prying the battery up with a screwdriver.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

EEVblog Electronics Community Forum

Author Topic: Agilent Keysight 3034a X-Series does not show traces (Read 313 times)

Machlee

Agilent Keysight 3034a X-Series does not show traces

TheSteve

Re: Agilent Keysight 3034a X-Series does not show traces

Machlee

Re: Agilent Keysight 3034a X-Series does not show traces

Share me