Author Topic: Joffra Dry Block repair by a TikTokker  (Read 129 times)

0 Members and 1 Guest are viewing this topic.

Offline mendip_discoveryTopic starter

  • Frequent Contributor
  • **
  • Posts: 926
  • Country: gb
Joffra Dry Block repair by a TikTokker
« on: July 11, 2024, 07:01:06 pm »
I didn't have the time at work to look at this, plus it had already been sent out and we were told it was BER. Turns out you can get a TikTok person to fix it. The MD found him, I am too old to be a youth and too young to be creepy enough for it.

https://www.tiktok.com/@retrosix/video/7390263865562484001

I wish he had asked if we wanted a new fan as it needs a new one as a few fins have left for other places.

Does anyone know how to adjust the temp as it's a degree or so out at the moment?
Motorcyclist, Nerd, and I work in a Calibration Lab :-)
--
So everyone is clear, Calibration = Taking Measurement against a known source, Verification = Checking Calibration against Specification, Adjustment = Adjusting the unit to be within specifications.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf