« previous next »
Pages: Prev 1 [2]  All   Go Down

Author Topic: How to test an IR2104/2111?  (Read 8340 times)

0 Members and 3 Guests are viewing this topic.

Offline wraper

  • Supporter
  • ****
  • Posts: 17581
  • Country: lv
Re: How to test an IR2104/2111?
« Reply #25 on: April 21, 2024, 05:22:05 pm »
Looks working fine.
Logged
 

Offline DELTA67Topic starter

  • Regular Contributor
  • *
  • Posts: 57
  • Country: fr
Re: How to test an IR2104/2111?
« Reply #26 on: April 21, 2024, 06:55:02 pm »
Quote from: wraper on April 21, 2024, 05:22:05 pm
Looks working fine.
Yes, the only downside in the DC test is that the HO output of the IR2104 don't goes low down to 0V. the low level of this output is about 3V.
in the AC test there's no signal at this output as I said before (it stays high or low, I don't remember the measurement I've done) .
Logged
 

Offline mtwieg

  • Frequent Contributor
  • **
  • Posts: 255
  • Country: us
Re: How to test an IR2104/2111?
« Reply #27 on: April 23, 2024, 12:26:05 pm »
Something is still wrong with the IR2104 then. Its outputs should pull strongly all the way down to ~0V.

If you tie SD to GND, does that cause both outputs to pull low?
Logged
 

Offline picses_74

  • Newbie
  • Posts: 1
  • Country: eg
Re: How to test an IR2104/2111?
« Reply #28 on: September 30, 2024, 11:51:31 pm »
Hello , I would like to thank you all for the info I found here , ( IR2111 ) Vin should be more the 5V , I ve been trying for 3 hours to get it to work with arduino and I got no output . I thn tested with function generator with 12v and i worked . Many many thanks for you all :)

Amr
Logged
 
Pages: Prev 1 [2]  All   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee