Just to inform you that the development continues.
New:
- Added 1/2 and 1/4 power for small irons - no need of lower voltage transformer on small irons - drives them all from 24V toroidal transformer.
- Added JBC C105/C115 nano iron
- Added JBC Nanotweezers (allthough not tested - waiting it to arrive)
- Added PACE TD200 iron
- JBC C210 and microtweezers works on 1/4 power MUCH more smoothly
- Added support for SH1106 display controller
- Added holder sensor filtering
- Added wake up by key or sensor
- Revised almost all iron profiles (due to malfunction in my controller some of them were incorrect)
Here is Git repo with really good notes and explanation for everything:
https://github.com/valerionew/unisolder-notesHere is my repo (linked to the above), where I upload latest firm ware etc.
https://github.com/sparkybg/UniSolder-5.2There are various places on the web where PCBs, sets of parts, and even ready assembled board can be purchased, Tindie for example.
P.S: Small movie driving JBC C105 (these are TINY
):