« previous next »
Pages: [1]   Go Down

Author Topic: MME-BOOT - Complete CAN BUS (MCP2515) XMega Bootloader with AES & Software  (Read 1625 times)

0 Members and 1 Guest are viewing this topic.

Offline cmcraesloTopic starter

  • Regular Contributor
  • *
  • Posts: 64
  • Country: 00
MME-BOOT - Complete CAN BUS (MCP2515) XMega Bootloader with AES & Software
« on: January 23, 2017, 04:22:46 pm »
Hey guys.

I've recently migrated one of my devices to CAN BUS which meant that I had to build the firmware upgrade tool for my customers as well. I've looked all around the web and found few different versions, but none so complete that I could use. This is the reason I decided to make one and share this project with anyone that is doing the same.

Link to my project:
https://community.atmel.com/projects/mme-boot-complete-can-bus-mcp2515-xmega-bootloader-aes-and-software-encrypt-update

Feel free to test & comment :)

Thanks
Logged
 
The following users thanked this post: trevwhite, SKPang

Offline Menen

  • Newbie
  • Posts: 6
  • Country: ru
Re: MME-BOOT - Complete CAN BUS (MCP2515) XMega Bootloader with AES & Software
« Reply #1 on: February 24, 2018, 10:57:36 am »
The bootloader is not going to. There are no can.h files
Logged
 

Offline cmcraesloTopic starter

  • Regular Contributor
  • *
  • Posts: 64
  • Country: 00
Re: MME-BOOT - Complete CAN BUS (MCP2515) XMega Bootloader with AES & Software
« Reply #2 on: February 24, 2018, 05:11:43 pm »
You can remove the #include "can.h" file and it will compile normally.
I've updated the files on the site and you can download it again.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee