« previous next »
Pages: [1]   Go Down

Author Topic: Old Scanner type?  (Read 1265 times)

0 Members and 2 Guests are viewing this topic.

Offline Chris56000Topic starter

  • Frequent Contributor
  • **
  • Posts: 912
  • Country: gb
Old Scanner type?
« on: January 28, 2019, 07:00:21 pm »
Hi!

Just a quickie one - I know it's only a minor point - I'd like to build this UV LED exposure box. . .

https://lytrax.io/blog/projects/diy-uv-exposure-box

. . .but it would be handy to have the same or a very similar scanner as a base as the model depicted already has 12V and USB inlets ready for use and two buttons on the front in a convenient place all ready for use!

Does anyone recognize this make and model of scanner so I can look for the same or one very similar?

Chris Williams
« Last Edit: January 28, 2019, 07:05:56 pm by Chris56000 »
Logged
It's an enigma that's what it is!! This thing's not fixed because it doesn't want to be fixed!!
 

Offline rsjsouza

  • Super Contributor
  • ***
  • Posts: 6068
  • Country: us
  • Eternally curious
    • Vbe - vídeo blog eletrônico
Re: Old Scanner type?
« Reply #1 on: January 28, 2019, 07:11:43 pm »
Logged
Vbe - vídeo blog eletrônico http://videos.vbeletronico.com

Oh, the "whys" of the datasheets... The information is there not to be an axiomatic truth, but instead each speck of data must be slowly inhaled while carefully performing a deep search inside oneself to find the true metaphysical sense...
 

Offline webgiorgio

  • Regular Contributor
  • *
  • Posts: 70
  • Country: dk
Re: Old Scanner type?
« Reply #2 on: January 29, 2019, 12:34:07 pm »
Any old scanner will work.
Here is mine http://www.ingdemurtas.it/elettronica/bromografo2/

Logged
 

Offline Chris56000Topic starter

  • Frequent Contributor
  • **
  • Posts: 912
  • Country: gb
Re: Old Scanner type?
« Reply #3 on: February 25, 2019, 07:23:46 pm »
 Hi!

Thanks for that – the reason I was interested in the same model as per the original prototype as it already has USB and power holes provided to give a neat completed finish plus a convenient sloping front for the display module, control buttons & encoder control!

Chris Williams
Logged
It's an enigma that's what it is!! This thing's not fixed because it doesn't want to be fixed!!
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee