Hello.
I'm seeing strange thing on my Tektronix 2336 YA. Since I've bought it oscilloscope is triggered by a pulse that is coming from "nowhere". It appears randomly in every 30s - 2 minutes.
This pulse is seen on each channel (on AC/DC/GND mode), probes connected/disconnected. This pulse is also seen on probe compensation signal. This is how I've managed to record it using 2nd oscilloscope. Pulse/ ringing frequency is between 100-200 MHz.
This pulse runs trigger.
I've also accidentally recorder it on below video (0:36 second)
Wiertolot - Silnik EMAX GT2215I've recorder this pulse also on probe compensation signal:
Any ideas why this pulse appears? How can it be fixed? What to check ? ;]
Thanks for replaying