Author Topic: Identifying battery connector  (Read 707 times)

0 Members and 1 Guest are viewing this topic.

Offline PP3331Topic starter

  • Contributor
  • Posts: 43
  • Country: us
Identifying battery connector
« on: September 05, 2020, 05:55:45 pm »
Trying to identify this lipo battery connector. Not concerned about the wiring (I already know that), just the designation of the connector type if possible. Thanks!
 

Offline Renate

  • Super Contributor
  • ***
  • Posts: 1460
  • Country: us
Re: Identifying battery connector
« Reply #1 on: September 05, 2020, 06:58:21 pm »
I make it out as 1.75 mm pitch?
 

Offline PP3331Topic starter

  • Contributor
  • Posts: 43
  • Country: us
Re: Identifying battery connector
« Reply #2 on: September 05, 2020, 07:05:00 pm »
I just measured it closely -- exactly 2mm.
 


Offline PP3331Topic starter

  • Contributor
  • Posts: 43
  • Country: us
Re: Identifying battery connector
« Reply #4 on: September 05, 2020, 07:29:09 pm »
Yep, there are a lot that look familiar. The trick is going to be finding exactly the right one. Thanks.
 

Offline Renate

  • Super Contributor
  • ***
  • Posts: 1460
  • Country: us
Re: Identifying battery connector
« Reply #5 on: September 05, 2020, 09:03:21 pm »
I make it out as 1.75 mm pitch?
Ok, 2 mm.
It's just that the ruler is not really in the plane of the contacts, either the top or the bottom.
(The ruler snippets are from the photo, mm.)
 

Offline PP3331Topic starter

  • Contributor
  • Posts: 43
  • Country: us
Re: Identifying battery connector
« Reply #6 on: September 05, 2020, 09:05:47 pm »
It's hard to get a good photo with the ruler and I can't get my caliper in there. But in-person examination definitely comes out as 2mm.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf