Programming Guide for STM32F303C8T6

[Swaroop 21]

I have reused a STM32F303C8T6 from an old PCB. This uC is pin Compatible with the STM32F103C8T6 aka the "bluepill" so I replaced the 103F with the 303F and got the Blink Sketch running. As the 303F has inbuilt 12Bit DACs, Comparators and Op Amps, I want to know how to use them with STMCube IDE GUI Configuration. Are there any programming guides on how to use these ? I looked up on YouTube but I didn't find specifically for this model.

[pcprogrammer]

Have you checked the ST website for the manuals?

Everything you need to know about the F303 can be found there.

[dietert1]

STM provide:
- datasheet
- reference manual
- HAL library reference manual
- errata sheet
- firmware libraries
- software examples
- application notes. e.g. AN3116
- community
- wiki
In total several thousand pages. The web has lots of answers, e.g. stackoverflow.com. The STM32 CubeMX configuration tool is very useful for a beginner.

Regards, Dieter