« previous next »
Pages: [1]   Go Down

Author Topic: Capacitance on Fluke 17B  (Read 2803 times)

0 Members and 1 Guest are viewing this topic.

Offline grcTopic starter

  • Newbie
  • Posts: 1
Capacitance on Fluke 17B
« on: May 08, 2011, 06:48:03 pm »
Looking at the spec for capacitance they state "Capacitance : 0.01nF to 100uF" by under specs "Capacitance : 50nF / 200nF / 2uF / 20uF / 200uF / 20mF ,  +/-2% +5" Can you measure 20,000 ufd(20 mf) or 100 ufd?

Thanks
Geoff

Logged
 

Offline Kiriakos-GR

  • Super Contributor
  • ***
  • !
  • Posts: 3525
  • Country: gr
  • User is banned.
    • Honda AX-1 rebuild
Re: Capacitance on Fluke 17B
« Reply #1 on: May 08, 2011, 07:12:41 pm »
It is advisable to post the link that you found the specs.

Some information are about the display resolution, and others about the true measured values.
Logged
 

Offline CoolBeer

  • Newbie
  • Posts: 6
Re: Capacitance on Fluke 17B
« Reply #2 on: May 20, 2011, 07:19:36 am »
It's 100uF, and with the tolerances on electrolytics being -20%+80%(on some), you could  be unable to measure 100uF ones.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee