Author Topic: Seeking TFTP Server for BDI3000 Programmer (Windows 10/11 Compatibility)  (Read 378 times)

0 Members and 1 Guest are viewing this topic.

Offline tarun172Topic starter

  • Regular Contributor
  • *
  • Posts: 66
  • Country: us
Hello everyone,

I'm in search of a TFTP server that is compatible with the BDI3000 Programmer and works on Windows 10/11. If anyone has experience with this setup or can recommend a suitable TFTP server, I’d greatly appreciate your assistance.

Thanks in advance for any leads!

tarun172
Thanks & Regards,
Tarun S
 

Online abeyer

  • Frequent Contributor
  • **
  • Posts: 352
  • Country: us
Re: Seeking TFTP Server for BDI3000 Programmer (Windows 10/11 Compatibility)
« Reply #1 on: September 08, 2024, 08:38:58 pm »
Haven't used it specifically for that device, but a modern windows tftpd that's commonly used is tftpd64

I don't think it does BOOTP, though, so you have to make sure your client can configure its network on its own enough to get connected to TFTP. Note that by default windows firewall is likely to block that, so if it's not disabled you'll have to also make sure to configure it.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf