Hello, sorry for coming on the forum so suddenly and posting on a topic already.
short story, I was researching a project that would transform my copy of stm32f103t8, the cs32f103t8. After much searching I found the project:
https://github.com/amitesh-singh/FASTUSBasp1 - I was excited and then I was going to download it, but before I decided to prepare my copy of the stm32 and when I went to program it with the "fastusbasp.bin" firmware I had the bad news that it messed up, when I pressed the reset button the led wouldn't blink, probably it was static, I certainly didn't take the necessary care.
2 - This is where I went looking for another one to buy and that's when I found out I had a copy and decent even according to the post no:
https://hackaday.com/2020/10/22/stm32-clones-the-good-the-bad-and-the-ugly/But unfortunately my copy was damaged when I went to upload "fastusbasp.bin
3 - Since I was going to have to buy one then I went looking for one with USB C because it is very convenient and I could use the cable from my smartphone...
and I came across some copies that you could see the screen printing of the encpsulamento very ugly, there is a copy ch32f103 this seems to be problematic in boot, I was wondering if this copy ch32f103 would work with the firmware of FASTUSBasp.
4 - So I came to this forum, it seems to be very cool and fun, in this post and decided to buy the air32f103 to test and also buy an arduino nano with usb
I am very anxious to receive and test mine, I ordered from the same link
It cost me 1.80 EUR converted from 10.65 BRL
fanoush Can you make a test of this FASTUSBasp firmware?
I don't know English, so I used a translator.