VISHAY PRECISION RESISTORS EBAY

[VNUTDENYER]

Quick question.  Are those 1k 2ppm .01% Vishay resistors from Poland worth $12 ea. to build good Hamon divider for 100-12000 ohm use checking 6-1/2 digit dmm?  Heading to ER now from CCP virus confinement so sorry about lack background info.

[RandallMcRee]

I would say not.

I have found at least two sources (but not at arbitrary values) of precision resistors that provide similar specs for $3 per resistor. Look around.

So, only worthwhile if you *must* have a certain value. For a hamon divider that is not the case.

Thanks,
Randall

[ArthurDent]

I have purchased several orders of those precision SFERNICE/Vishay resistors on eBay from sm-poland7 in Poland and I found them to be first quality. His feedback is 100%. If you buy from him go with the economy shipping at $6USD and not the faster $39 shipping! He is a reliable supplier of precision resistors and I am just a very satisfied customer.

Those resistors were used in my LTZ1000ACH standard that has been on 24/7 for over a year. My standard agrees with the USA Cal Clubs standard and my HP3457A 6.5 digit DMM.See photo below of my standard with the inner metal cover off and without the foam shield around the LTZ1000ACH.

[VNUTDENYER]

Thanks for seller vote, will look some more but wanted R300 for full scale HP3478 ranges to start (set of 10/12 makes  30, 50, 100,150, 300,450, 3k and lots more).  Hoping to start with at least 0.1% and then test/match for tighter.  Did not see US shipping for $6 which would be fine.  Still looking  for better way to series/ parallel them selectively than banana plugs.