On a hobby Rx I've torn down, the male terminal strips aren't the standard 2.54mm x 2.54mm pitch square post terminals, but by my measurement are 2.54mm pitch in the X direction, and in the long Y direction, 2.8mm pitch. I have never seen this before, and please trust me when I say it isn't 2.54mm x 2.54mm.
I cannot seem to find such an oddball pitch to buy, but I know they are mass produced, so if anyone can help me find this oddball matching female header I would be greatly appreciated! SMT is preferred, but through-hole is okay if it has a pick and place ordering option.
The Rx is a Tactic brand receiver. I've torn down a slew of them along with different models, they all use this weird spacing.
![](https://i.imgur.com/pQWmDOF.jpg)