Yamaha CL Clone China Source

[kylehunter]

Hi there,

I'm looking to order a fair amount of extra 8mm and 12mm CL feeders from China. Can I have a source or two that people have used before? The supplier I usually order from has gone out of business, and I want to avoid ordering a large amount of feeders without at least having a referral from someone else.

Thanks!

Kyle

[mon2]

Yes. Try Elissa. Large company in Shenzhen who builds these feeders. Met with them last October in China during Nepcon fair time.

She also builds an incredible adjustable smd stencil adapter we use for our Ekra X4 printer.

Elissa
Shenzhen Wenzhan Electronic Technology Co., Ltd.
Website: www.smtwenzhan.com 
Skype: smtwenzhan@163.com
Tel/Wechat/Whatsapp: +86 13923713803
QQ: 2966592980
Add: 3F. Building D, Lihao Yongda Park, No.20 Dongfang Blvd, Matian, Guangming District, Shenzhen, Guangdong, China 518106

[glenenglish]

Suggest ksunsmt
over the past 7 years , I have purchased > 180 CL feeders from this company
numerous machine spares, trolleys etc, now I buy my (copy) Samsung air feeders from them, 70 so far...
so , total business > 30,000 USD.
if I had a problem with one, they send parts without question....

https://www.ksunsmt.com/products/smt-parts.html

my contact    jenny@ksunsmt.com

[48X24X48X]

Suggest ksunsmt
over the past 7 years , I have purchased > 180 CL feeders from this company
numerous machine spares, trolleys etc, now I buy my (copy) Samsung air feeders from them, 70 so far...
so , total business > 30,000 USD.
if I had a problem with one, they send parts without question....

https://www.ksunsmt.com/products/smt-parts.html

my contact    jenny@ksunsmt.com

Would recommend them as well. Also Shenzhen Wenzhan on Alibaba. Their feeder comes with longer warranty compared to others.

[law]

I just paid for some 8mm x 4mm and 2mm pitch feeders from Elissa at Shenzhen Wenzhan.
They had the lowest cost feeders even though their shipping cost was higher. They ended up being cheaper overall.

Will see how they go!

[Mangozac]

I hope this isn't too off-topic (I can move to a new topic if so) but has anybody got a good reference on how to service CL feeders? Did Yamaha/Philips/Assembleon ever publish such information?

[level6]

Do they offer electric feeders? I did not see any listed in their catalog.

[48X24X48X]

Do they offer electric feeders? I did not see any listed in their catalog.

Shenzhen Wenzhan have them.